Intake Manifolds

GReddy Intake Plenums are designed to maximize performance in highly tuned engines. The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing GReddy Intake manifold is a must.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

  *WARNING: Cancer & Reproductive Harm
www.P65warnings.ca.gov





Car Make Engine Chassis Code Description PART #
Nissan GTR 2009-on

RX Intake Manifold Plenum

13522330
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

- Price Reduction was previously $3500, now $2495.

(R35) VR38DETT

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Cast Aluminum high-flow intake Manifold for VR engine

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2
 

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*also see our 2nd Variation with optional Sub-Injector provisions. p/n 13522331

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 13522330
Price: 2495.00
IMAGES:
Nissan GTR 2009-on

RX Intake Manifold Plenum w/ Inj Boss

13522331
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

Cast Aluminum high-flow intake Manifold for VR engine with additional Injector Bosses  
UPDATE(now pre-drilled, with include billet plugs)

For extra high horsepower applications.  This RX SPL manifold features 6 boss locations to allow for 6 additional injectors to be positioned at the base of each runner for secondary injectors.  

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2 & Blog post 3
 

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 13522331
Price: 2495.00
IMAGES:
Nissan GTR 2009-on

Fuel Rail Set

13923101
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

VR38DETT

High Flow Fuel Rail Set (right and left banks)

14mm main tube, with -8 AN fittings

for more info, please see our (blog post)

 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 13923101
Price: 800.00
IMAGES:
Nissan GTR 2009-on

RX Billet Throttle KIt

13920460
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

RX big bore billet throttle bodies

Use factory electronic throttle body components

75mm mounting dia., 68mm butterfly dia., 70mm plenum dia.

Anodized Aluminum finish

*special gasket included

**drive by wire motor, acessories & sensors not included (uses OEM)

***Must purchase 80-70mm silicone hose reducers  (x2) and hose clamps (x4) if using in conjunction with GReddy RX Intake Manifold Spl Piping Kit, part# 13920401

Use with GReddy RX Intake Manifold p/n 13522330

For more info see: our Blog.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.


**Late 2011-on owners, please call us for details- 949-588-8300

Part #: 13920460
Price: 2260.00
IMAGES:
VIDEO:
view video
Nissan GTR 2009-on

RX Intake Manifold Spl Piping Kit

13920401
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

Special Aluminum Piping kit for RX Intake Manifold equipped

R35 GT-Rs

MPORTANT – Can only be used in conjunction with GReddy Type 29F Intercooler. Will not work with OEM intercooler or other aftermarket intercoolers.

*Must purchase 80-70mm Silcone Hose Reducer (x2) and hose clamps (x4) if using in conjunction with GReddy RX Throttle Bodies, part# 13920460

 

For more details on the RX Intake Manifold please see our Blog post.

 

 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Part #: 13920401
Price: 775.00
IMAGES: