Intake Manifolds

GReddy Intake Plenums are designed to maximize performance in highly tuned engines. The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing GReddy Intake manifold is a must.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

  *WARNING: Cancer & Reproductive Harm
www.P65warnings.ca.gov





Car Make Engine Chassis Code Description PART #
Nissan S13

Special Piping

13920414
Car Make: Nissan
Engine: S13
Chassis Code:
Notes:

SR20DET

adapts S13 plenum to GReddy I/C kit

Part #: 13920414
Price: 175.00
Nissan ECR33

Throttle adapter

13920450
Car Make: Nissan
Engine: ECR33
Chassis Code:
Notes:

weld on adapter to GReddy Intake Manifold

use the stock throttle body

(instead of Q45 throttle-body)

Part #: 13920450
Price: 125.00
IMAGES:
Nissan R33 / R34

Fuel Rail

13920603
Car Make: Nissan
Engine: R33 / R34
Chassis Code:
Notes:

10.5 dia. / topfeed BCNR33 / BNR34

Part #: 13920603
Price: 340.00
IMAGES:
Toyota 2JZ-GTE

GReddy 2JZ PRO Surge Tank Kit - NEW!

13512303
Car Make: Toyota
Engine: 2JZ-GTE
Chassis Code:
Notes:

(JZA80) 2JZ-GTE in custom applications

Designed specifically for custom applications with 2JZ engine transplants, the GReddy 2JZ Pro Surge Tank Kit offers the versatility to best match the throttle-body inlet angle and vacuum/air ports for your engine bay. This Pro kit includes 4.0l tank capacity with a large 90mm throttle-body, and top feed fuel rail, and necessary weld-on flanges. For additional rigidity during high boost applications, it uses thick 3mm formed metal tank that is welded to a precision machined, grooved base, with six individual, internal velocity-stacks. Also pre-welded are the tuned primary runners and intake manifold flange with fuel injector ports. Another key feature is the unique, purpose-built  fuel-resist, ring-type gaskets that seal the manifold to the head.


Pro Kit includes:
    SURGE TANK / THROTTLE BODY / THROTTLE FLANGE / FUEL DELIVERY TUBE & MOUNTS

    Collector tank capacity 4.02 l (normal ratio 200%)
    Surge tank, base plate and runners pre-welded
    Welding required to attach throttle body flange, throttle cable mount and air port flanges
    Tuned internal velocity stacks on each runner
    Primary runner length 130㎜, OD 14.0mm ID 13.0mm
    Specially designed and manufactured O-ring style gasket provide superior manifold to head sealing for each runner
    Throttle-body hose diameter 100mm, internal butterfly diameter 90mm with low-profile throttle shaft
    Fuel Delivery tube for 14mm top feed injector (compatible with Nissan R35 VR38DETT factory injectors)
    Compatible with OEM factory Idler Control Valve and TPS Throttle Position Sensor 

 

   *For competition (Race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13512303
Price: 1680.00
IMAGES:
Toyota JZA80

Special Piping

13910401
Car Make: Toyota
Engine: JZA80
Chassis Code:
Notes:

(JZA80) 2JZ-GTE

adapts GReddy intake manifold with GReddy FMIC

Part #: 13910401
Price: 230.00
IMAGES:
Toyota JZA80

TPS Kit

13910400
Car Make: Toyota
Engine: JZA80
Chassis Code:
Notes:

(JZA80) 2JZ-GTE

for OEM  Toyota  TPS and Q45 Throttle Body combination

Part #: 13910400
Price: 72.00
IMAGES:
Nissan ECR33

Intake Manifold Plenum

13522316
Car Make: Nissan
Engine: ECR33
Chassis Code:
Notes:

(ECR33) RB25DET

A great addition to modified #RB25DET engines, the GReddy #ECR33 Intake Manifold Plenum relocates the throttle body for more ideal intercooler/charge air pipe routing. p/n 13922316 is designed to use larger Q45 Throttle body or equivalent.


*Use weld on p/n 13920450 to convert the plenum to use standard throttle body

 

 

reloc. throttle position

must use larger Q45 throttle body

(or use adapter p/n 13920450)

Part #: 13522316
Price: 1200.00
IMAGES:
Nissan S13

Intake Manifold Plenum

13522319
Car Make: Nissan
Engine: S13
Chassis Code:
Notes:

cast aluminum, high volume

OEM throttle body

Part #: 13522319
Price: 800.00
IMAGES:
Nissan S14 / S15

Intake Manifold Plenum

13522317
Car Make: Nissan
Engine: S14 / S15
Chassis Code:
Notes:

(S14/S15) SR20DET

short runner, stock throttle body

Part #: 13522317
Price: 900.00
IMAGES:
Nissan S14 / S15

Intake Manifold Plenum (G)

13522318
Car Make: Nissan
Engine: S14 / S15
Chassis Code:
Notes:

(S14/S15) SR20DET

short runner, for larger Pulsar throttle

Part #: 13522318
Price: 900.00
IMAGES:
Nissan S14 / S15

Special Piping

13920412
Car Make: Nissan
Engine: S14 / S15
Chassis Code:
Notes:

SR20DET

adapts p/n 13522317 GReddy Intake Manifold to GReddy I/C Kit

Part #: 13920412
Price: 260.00
IMAGES:
Nissan S13 / S14 / S15

Fuel Rail

13920503
Car Make: Nissan
Engine: S13 / S14 / S15
Chassis Code:
Notes:

10.5 dia., for GReddy SR20DET  Manifolds only

(excluding older 2pc S13)

Part #: 13920503
Price: 250.00
IMAGES:
GReddy Emblem

Replacement GReddy Emblem

99900074
Car Make: GReddy Emblem
Engine:
Chassis Code:
Notes:

Retangular GReddy Emblem badge.

Designed to replace orginal GReddy Intake Manifold Emblems.

Black plastic constuction with brushed chrome finish. Embossed GReddy logo.
Self-adheisve backing.  Rectangular shape.

Size: 105mm X 20mm : 2mm thick  
           (4 1/8" X 25/32")
 

Part #: 99900074
Price: 20.00
IMAGES:
Nissan S13

Intake Manifold Plenum (G)

13522320
Car Make: Nissan
Engine: S13
Chassis Code:
Notes:

cast aluminum, high volume

for use with larger Nissan Pulsar throttle-body

Part #: 13522320
Price: 800.00
IMAGES:
Nissan S14 / S15

Special Piping

13920413
Car Make: Nissan
Engine: S14 / S15
Chassis Code:
Notes:

SR20DET

adapts p/n 13522318 GReddy Intake Manifold to GReddy I/C Kit

Part #: 13920413
Price: 260.00
IMAGES:
Nissan RB26DETT

Special Piping

13920400
Car Make: Nissan
Engine: RB26DETT
Chassis Code:
Notes:

RB26DETT

adapts p/n 13522306 GReddy Intake Manifold to GReddy I/C Kit

Part #: 13920400
Price: 415.00
Nissan S13

Special Piping

13920415
Car Make: Nissan
Engine: S13
Chassis Code:
Notes:

SR20DET

adapts S13 plenum to GReddy I/C kit (with pulsar throttle body)

Part #: 13920415
Price: 160.00
Toyota JZA80

GReddy Cast-Al Intake Manifold Plenum

13512301
Car Make: Toyota
Engine: JZA80
Chassis Code:
Notes:

(JZA80) 2JZ-GTE, Supra TT

upper tank, req. throttle body

Part #: 13512301
Price: 1480.00
IMAGES:
Nissan GTR 2009-on

RX Intake Manifold Plenum

13522330
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

- Price Reduction was previously $3500, now $2495.

(R35) VR38DETT

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Cast Aluminum high-flow intake Manifold for VR engine

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2
 

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*also see our 2nd Variation with optional Sub-Injector provisions. p/n 13522331

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13522330
Price: 2495.00
IMAGES:
Nissan GTR 2009-on

RX Intake Manifold Plenum w/ Inj Boss

13522331
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

Cast Aluminum high-flow intake Manifold for VR engine with additional Injector Bosses  
UPDATE(now pre-drilled, with include billet plugs)

For extra high horsepower applications.  This RX SPL manifold features 6 boss locations to allow for 6 additional injectors to be positioned at the base of each runner for secondary injectors.  

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2 & Blog post 3
 

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13522331
Price: 2495.00
IMAGES:
Nissan GTR 2009-on

Fuel Rail Set

13923101
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

VR38DETT

High Flow Fuel Rail Set (right and left banks)

14mm main tube, with -8 AN fittings

for more info, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13923101
Price: 800.00
IMAGES:
Nissan GTR 2009-on

RX Billet Throttle KIt

13920460
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

RX big bore billet throttle bodies

Use factory electronic throttle body components

75mm mounting dia., 68mm butterfly dia., 70mm plenum dia.

Anodized Aluminum finish

*special gasket included

**drive by wire motor, acessories & sensors not included (uses OEM)

***Must purchase 80-70mm silicone hose reducers  (x2) and hose clamps (x4) if using in conjunction with GReddy RX Intake Manifold Spl Piping Kit, part# 13920401

Use with GReddy RX Intake Manifold p/n 13522330

For more info see: our Blog.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

 


**Late 2011-on owners, please call us for details- 949-588-8300

Part #: 13920460
Price: 2260.00
IMAGES:
VIDEO:
view video
Nissan GTR 2009-on

RX Intake Manifold Spl Piping Kit

13920401
Car Make: Nissan
Engine: GTR
Chassis Code: 2009-on
Notes:

(R35) VR38DETT

Special Aluminum Piping kit for RX Intake Manifold equipped

R35 GT-Rs

MPORTANT – Can only be used in conjunction with GReddy Type 29F Intercooler. Will not work with OEM intercooler or other aftermarket intercoolers.

*Must purchase 80-70mm Silcone Hose Reducer (x2) and hose clamps (x4) if using in conjunction with GReddy RX Throttle Bodies, part# 13920460

 

For more details on the RX Intake Manifold please see our Blog post.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13920401
Price: 775.00
IMAGES:
Scion FR-S 2013-

GPP Individual Throttle Body Kit  - NEW!

11910200
Car Make: Scion
Engine: FR-S
Chassis Code: 2013-
Notes:

also fits Subaru BRZ / Toyota 86
    for (ZN6) 4U-GSE / (ZC6) FA20

Compatible with Stock Air Intake, GReddy Air Intake(s) and GReddy Turbo Kit(s)
    (and force induction kits, which mount to stock location)

*For competition (Race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

 

GReddy Performance Products Individual Throttle Body conversion kit for the FRS/86/BRZ FA20 engine is designed to improve throttle response and mid-range torque. The system utilizes the stock FA20 electronic single throttle body, through special linkages, to operate the ITBs. The bolt-on kit includes necessary hardware, brackets, vacuum canister, high quality, cast intake manifold adapters, large diameter runners and an intake manifold plenum to the stock throttle position. This makes the GPP ITB conversion compatible with the stock air intake, or any aftermarket air intake or turbo kit, which connects in the factory throttle position. The kit also includes balancing tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

(Installation Instructions)

See more info on our Blog 

Bolt-on Racing Individual Throttle Bodies Conversion 
   (additional fuel management not included - requires original OEM electronic throttle body and compatible fuel injectors and fuel rail)

 

includes:  High quality cast aluminum intake manifolds (L/R), Genuine Toyota-Japan AE111 20V Individual Throttle Bodies (48mm butterflies), large cast runners and intake manifold plenum, necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

     also includes: Balancing Tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

 

*Notes: Future option for open 50mm velocity stacks and ECUTEK speed density set-up (removes runners and plenum) sold separately

 

GReddy Dyno Notes

   * Increased throttle response and mid-range torque
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

 

GReddy FR-S Product Page

Part #: 11910200
Price: 2900.00
IMAGES:
Nissan Skyline GT-R BNR32 / BCNR33 / BNR34

Intake Manifold Plenum

13522306
Car Make: Nissan
Engine: Skyline GT-R
Chassis Code: BNR32 / BCNR33 / BNR34
Notes:

Make:  Nissan
Model: Skyline GT-R
Year: 1989-02

Chassis: BNR32 / BCNR33 / BNR34
Engine: RB26DETT
Type: High-flow Cast Aluminum intake manifold

Product features

Tuned large volume cast intake manifold for higher boost applications

   - Special piping kit for intake manifold availiable (sold separately)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13522306
Price: 1000.00
IMAGES:
Nissan Skyline GT-R BNR32 / BCNR33 / BNR34

Spl Hard Piping kit for GReddy Intake Manifold

13920400
Car Make: Nissan
Engine: Skyline GT-R
Chassis Code: BNR32 / BCNR33 / BNR34
Notes:

Make:  Nissan
Model: Skyline GT-R
Year: 1989-02

Chassis: BNR32 / BCNR33 / BNR34
Engine: RB26DETT
Type: Special piping to complete charge piping to the GReddy Intake Manifold Plenum

Product features

Polished aluminum mandrel-bent piping for use with the GReddy Intake Manifold

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13920400
Price: 400.00
IMAGES:
Nissan Skyline GT-R BNR32 / BCNR33 / BNR34

GReddy RB26 (Single Throttle) Surge Tank Kit  - NEW!

13522307
Car Make: Nissan
Engine: Skyline GT-R
Chassis Code: BNR32 / BCNR33 / BNR34
Notes:

Make:  Nissan
Model: Skyline GT-R
Year: 1989-02

Also fits
Chassis: BNR32 / BCNR33 / BNR34
Engine: RB26DETT

GReddy Intake Plenums are designed to maximize performance in highly tuned engines. The single throttle body surge tank conversion for the (R32 / R33 / R34) RB26 puts an emphasis on a balance of high power and mid-range torque. The kit features a large 90mm throttle-body and a 4.1L surge tank, that is 121% larger then the OEM piece. For extra rigidity during high boost applications, it uses thick 3mm formed metal tank that is welded to a precision machined, grooved base plate, with six individual, internal velocity-stacks. Between each connection are carefully designed and manufactured sealing rings. The CNC machined primary runners are sized for optimal efficiency. The kit comes anodized to provide a durable, scratch and rust resistant finish.

Testing on a high-powered 958hp/663ft-lb R32 GT-R showed a substantial increased in power throughout the RPM range to 1023hp/697ft-lbs

Skyline (BNR32 / BCNR33 / BNR34) GT-R Single Throttle Kit includes:
    - SURGE TANK / 6 CNC PRIMARY RUNNERS / THROTTLE BODY

  • Collector Surge Tank Size is 4.1l(VS Normal121%)
  • Surge tank, base plate come pre-welded
  • Tuned internal velocity stacks on each runner for increased efficiency
  • CNC machined inlet runners  L90㎜, Pipe Size φ58-45 (tapered)
  • Throttle-body hose diameter φ100mm, internal butterfly φ90mm, with low-profile throttle shaft
  • Specially designed and manufactured O-ring style gasket provide superior sealing for each runner
  • Compatible with OEM AAC valve and TPS throttle position sensor

 

 

 

*For competition (Race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Part #: 13522307
Price: 1850.00
IMAGES: