Sci/Toy/Sub FR-S / BRZ / 86 / GR86

Chassis: ZN6

Engine: 4U-GSE

Full Titanium Single to dual piping and dual muffler section cat-back exhaust
with adjustable tip lenght 

Number of Pieces:  3

Piping: Titanium 60mm to dual 50mm

Tip: Titanium 115mm (Adjustable length)

Resonator:  Yes

Silencer: No

Weight: 18.0 lbs

Sound level: 92/90 dBA

 Also see: Facebook - GReddy FR-S

High Flow - Airinx GT - TY-16GT  drop in replacement air filter element (for stock air box)

Also fits Subaru BRZ (MT/AT)
 * (also fits automatic transmission for the 2017 86/BRZ)

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Also fits Subaru BRZ
Chassis: ZN6 / ZC6
Engine: 4U-GSE / FA20
High Flow - Airinx AY-M (80) Air Intake Kit
Dry Element with cast Aluminum intake pipe.
 

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Carbon suction tube for improved response and weight savings. Includes: 70mm dia. GReddy silicone hoses

Compatiable with GReddy Airinix Intake KIt

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Also fits Subaru 2017 M/C BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Carbon suction tube for improved response and weight savings. Includes: 70mm dia. GReddy silicone hoses

Compatiable with GReddy Airinix Intake KIt

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

GReddy Air Intake Snorkel delivers more cool air into the factory air box, while carefully routing air from the front grill.  
The unique FRP shape promotes air flow to the filter element.  Mounting brackets and hardware included.

 Cool air intake tempatures provide improved performance and efficiency.

* compatiable with GReddy Circuit Spec Oil Cooler Kit.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

FA20 aluminum water neck, with built in bracket, water temp adaper.  Fits OEM and GReddy Type N radiator caps
(1.3K Black p/n 13911001, 1.3K Polished p/n 13911003, or 1.3K Brushed p/n 13911005.)

Allows for safe 1/8PT  water tempature sensor mounting in the upper radiator hose.
Includes 8mm dia. house union for water overflow, and optional 1/8PT plug cap.

Aluminum - anodized blue, with GReddy logo.

GReddy FR-S Product Page

Also fits Subaru BRZ (FA20)

40mm anodized Blue, billet aluminum hose adpter

installs in lower radiator hose for gauge water temp sensor

or lower hose for use with GReddy Breather Tank

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Anodized Gold, Aluminum baffle plate with a shark duct that balances engine oil to prevent oil pick up problems.
Smooth oil directing to oil pick up.  Increase stablity for oil pressure.
Ideal for high G-loads.  Both cornering and acel / decel situatations.

compatiable for N/A or GReddy turbo applications.

Aluminum - anodized gold, with GReddy logo.

GReddy FR-S Product Page

Circuit Spec with ducting.

also fits Subaru BRZ

NOTE* - This is a JDM Specific 86 Kit, which requires the relocation of an electric module (brackets not included) _{See image}

 (ZN6) 4U-GSE / (ZC6) FA20

positioned in front of the radiator, front right side of the bumper

10 row, Circuit Spec. with air ducting

Built in thermostat oil block adapter (operating temperature: 75c - 82c ±2c)
   (also includes GReddy M18 Sensor Terminal fitting (with 3 1/8PT ports)

light-weight nylon mesh hose & fittings

NS1010G core (+540cc or +0.57 quarts)

requires use of QX-1,3, SX-1,3 oil filter

* JDM Peformance Info: (Click Here)

p/n  12014633     10row Oil Cooler kit without air duct      MSRP $850.00

also fits Subaru BRZ

M20 x P1.5 size with adapter for FA20 / 4U-GSE engines

JDM 1/8 PT (1/8 BSP) ports for sensors

*GReddy Sports Oil Filter sold separately #13901104

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

No fuss way to convenently access a vaccuum / boost source on a FR-S / 86 / BRZ's FA20 engine (also compatiable with Forrester FA20 engine)

Ideally suited for force induction applications, where there is a need to access vaccuum / boost, i.e boost controller, boost gauge, etc...

GReddy FR-S Product Page

also fits Subaru BRZ / Toyota 86
    for (ZN6) 4U-GSE / (ZC6) FA20

Compatible with Stock Air Intake, GReddy Air Intake(s) and GReddy Turbo Kit(s)
    (and force induction kits, which mount to stock location)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

GReddy Performance Products Individual Throttle Body conversion kit for the FRS/86/BRZ FA20 engine is designed to improve throttle response and mid-range torque. The system utilizes the stock FA20 electronic single throttle body, through special linkages, to operate the ITBs. The bolt-on kit includes necessary hardware, brackets, vacuum canister, high quality, cast intake manifold adapters, large diameter runners and an intake manifold plenum to the stock throttle position. This makes the GPP ITB conversion compatible with the stock air intake, or any aftermarket air intake or turbo kit, which connects in the factory throttle position. The kit also includes balancing tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

(Installation Instructions)

See more info on our Blog 

Bolt-on Racing Individual Throttle Bodies Conversion 
   (additional fuel management not included - requires original OEM electronic throttle body and compatible fuel injectors and fuel rail)

includes:  High quality cast aluminum intake manifolds (L/R), Genuine Toyota-Japan AE111 20V Individual Throttle Bodies (48mm butterflies), large cast runners and intake manifold plenum, necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

     also includes: Balancing Tools - Throttle Body Synchronizer and electronic A/F dongle for equalizing each cylinder.

*Notes: Future option for open 50mm velocity stacks and ECUTEK speed density set-up (removes runners and plenum) sold separately

GReddy Dyno Notes

   * Increased throttle response and mid-range torque
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

GReddy FR-S Product Page

[DISCONTINUED for USA]

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

See more info on our Blog

Tuner Turbo Kit ( additional fuel management not included)

GReddy T518Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

aluminum intercooler piping (direct routing)

Type 40E Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    * See the IMPORT TUNER mag article: 

GReddy Dyno results:  +93.5whp* / +68.7ft-lbs* @ 7psi
  *(2013 Scion FR-S with GReddy Evo3 exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway

GReddy FR-S Product Page

[DISCONTINUED for USA]

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 with low compression built motors only*
please use #11510094 T518Z or #11518000 GTX-R for stock engine applications

(Installation Instructions)

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

See more info on our Blog

Tuner Turbo Kit ( additional fuel management not included)

Larger GReddy T620Z -10cm2 actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow Airinx AY-SM air intake

aluminum intercooler piping (direct routing)

Type 40E Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

    * TRUST web info. 

GReddy Dyno Notes
  *(Scion FR-S with GReddy large diameter exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
  **dyno results may vary depending on conditions, additional components & tuning

*** Compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S
     ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

GReddy FR-S Product Page

[DISCONTINUED for USA]

Winner of the 2018 Dsport Magazine's 86 (Forced Induction) Challenge - GPP GTX2867R-Gen2 Tuner Turbo Kit!

also fits Subaru BRZ / Toyota 86 

for (ZN6) 4U-GSE / (ZC6) FA20 (for stock and built engines)

   -- Typical low boost Dyno results: 278whp / 210ft-lbs @ 10.29psi
   -- Easily capable of boosting higher for even more power
        ^{(additional engine modifications may be necessary)}
   -- GTX2867R -Gen2 turbo is rated upto 550hp

      * NOTE:  Replacement, low profile radiator fans required for installation.
                    [2x SPAL Low Profile 9” fans SPAL Part#  30100392*]
                    Intercooler installation will also require removing the factory crash beam.  [Race option - "Street Fraction Bash Bar"]

*For competition (race) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Includes: GARRETT GTX2867R GEN. II Turbocharger

GReddy Performance Products is proud to add the full line of Turbo by Garrett GTX-R turbochargers to our GReddy/Mitsubishi line-up. With more options to better match the ideal turbocharger(s) to each specific application, look for more aggressive turbo kits from the GPP Turbo Kit line.

The latest addition to our FR-S/86/BRZ Tuner Turbo Kits is our Version 3, GTX-R Tuner Turbo Kit for the 2012-2017 FR-S, 86 and BRZ. Designed around a powerful Garrett GTX-2867R Gen II (with a rated range of 275-550hp,) this updated kit features a larger, centered GReddy Type-24 intercooler and all the necessary hardware for a versatile tuner kit, that will be an ideal fit for both stock FR-S/86/BRZ engines, as well as fully strengthened FA20 engines.

(Installation Instructions)

Tuner Turbo Kit ( additional fuel management not included)

Advanced Garrett GTX 2867 R Gen.II actuator turbo (top-mounted)

4-1 SUS Exhaust Manifold with dual flex-pipes (header type)

Large SUS downpipe & front pipe (removes catlyic-conveters)

free-flow GPP open element air intake

aluminum intercooler piping (direct routing)

Large centered Type 24 Intercooler with end-tanks

includes necessary gaskets, heat shields, couplings, hose, mounting brackets, etc.

GReddy Dyno results: 278whp* / 210ft-lbs* @ 10psi
*(2016 Scion FR-S with GReddy exhaust and GReddy Tuned-EcuTek - NOT INCLUDED)
**dyno results may vary depending on conditions, additional components & tuning

*** Not compatiable with GReddy Circuit Spec Oil Cooler Kit for FR-S ( p/n 12014632 )

In many states, it is unlawful to tamper with your vehicle’s emissions equipment. GReddy / GPP (GReddy Performance Products, Inc.) products are designed and sold for sanctioned off-road/competition, non-emissions controlled vehicles only and may never be used on a public road or highway. Using GReddy/GPP products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website: www.semasan.com/emissions for state by state details in the USA.) It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any GReddy/GPP product.
Legal for sale or use in CA only on vehicles which may never be driven on a public highway.

GReddy FR-S Product Page

[UPDATED]

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Full 6piece Aluminum engine pulley kit Increases engine response.
includes: Alternator pulley, water pump pulley, tensioner pulley, 2x No.1 Idler pulley and 1x no.2 Idler pulley

Duralumin - anodized blue, with GReddy logo.

GReddy FR-S Product Page

[UPDATED]

Also fits Subaru BRZ

Chassis: ZN6 / ZC6

Engine: 4U-GSE / FA20

Stanard 2 piece Aluminum engine pulley kit Increases engine response. 
includes: Alternator pulley, water pump pulley

Duralumin - anodized blue, with GReddy logo.

GReddy FR-S Product Page

also fits Subaru BRZ / Toyota 86  for (ZN6) 4U-GSE / (ZC6) FA20

GReddy Superior Spec. 2.1L FA20 / 4U-GSE Engine Stroker Kit

Engine strengthening is crucial for safety and reliability of FR-S and BRZ over the 350hp mark. GReddy engineers have drawn from our FR-S race experience to assemble a complete stroker kit for the FA20/4U-GSE boxer engine, using only superior components. The kit features 9.5:1, 86mm bore. 2618 T6 forged aluminum pistons with specially designed shape ideal for high boost applications. This is connected to extra strong H-beam 433OM steel alloy forged connecting rods with a factory style 18deg. split line. And at the heart of the 2.1L kit is our dynamic balanced, E4340 Cr-Ni-Mo alloy billet steel stroker crankshaft. 

 Forged Pistons (4)
    - 9.5:1 Compression
    - 86mm bore
    - 2618 T6 high tensile forged aluminum
    - ring widths 1.0 / 1.2 / 2.8mm
    - .866 x 2.250 free floating carbon steel wrist pins

 Connecting Rods (4)
    - Strong H-Beam Design with factory style 18deg. split line
    - Forged 4330M steel Alloy
    - CNC machined, shot peened
    - Silicone bronze bushings for full floating pins
    - Top quality 3/8" bolts

 Stroker Crankshaft (1)
    - E4340 Aircraft quality Cr-Ni-Mo alloy billet steel
    - Triple heat-treated
    - Ion-plasma nitride journals
    - High speed straight line oiling system
    - Dynamic balanced

see our blog for more on this kit.

GReddy FR-S Product Page

(ZN6) FR-S/86/BRZ  high capacity differential cover

Cast Aluminum, Off-set design for improved exhaust clearance

+750cc (1900cc capacity)

SUS baffle plate, for improved oil control 

Provisions for rear differential oil cooler hook up (M18 P1.5)

Port for 1/8PT temp sensor

Includes GReddy 5000G Neodymium drain bolt (MD-04, M16-P1.5)

*compatible with external differential fluid cooler.

- hard Urethane construction

lowers 17mm

Instruction Manual

Scion FR-S / Subaru BRZ. (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 3 without optional wings


Front Bumper - FRP -1pc.
Front lipGrill Mesh
Side Skirts - FRP -2pcs.
Rear Over-Fender set +90mm - FRP -4pcs.
Rear Under Diffuser +60mm - FRP -1pc.
Front Canards - FRP - 2pcs.
Side Canards - FRP - 4pcs.
Rear Canards - FRP - 6pcs.

Optional wing sets (sold separately)
Rear "Duck-tail" wing - FRP - 1pc.
Rear GT Wing set - FRP - 1pc.

Scion FR-S / Subaru BRZ (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 2. 

Front Bumper - FRP  -1pc.
   Front Splitter, OMP Rods, Grill Mesh 
Side Skirts - FRP -2pcs.
Front Over-Fender set +45mm - FRP -4pcs. 
Rear Over-Fender set +70mm - FRP -4pcs.
Rear Under Diffuser +60mm - FRP -1pc.
Rear "Duck-tail" wing - FRP - 1pc.

   ** (DAI X Rocket Bunny Option - now available)

See our FB for more details

Speedhunters preview the new Version 2 aero kit.

_{DISCLAIMER:
This body kit replaces the front OEM turn signal lights with aftermarket DRL LED type lights which can be wired to operate as driving lights and/or turn signals. However these lights are not DOT or E approved as this kit was originally developed for sales in Japan. It maybe unlawful to tamper, remove or replace DOT or E approved items with non-approved lights on street driven motor vehicles. The included DRL / signal lights should only be installed and used for off-road, competition show purposes, not for public street or highway use. Please be sure to check with your local and federal laws before purchasing or installing.} 

Scion FR-S / Subaru BRZ. (most parts will also fit 2017-20 models, except rear diffuser)
ZN6 (4U-GSE)

TRA Kyoto Designed

Rocket Bunny Wide-body Aero Kit - Version 3.5 without optional wings


Front Bumper - FRP -1pc.
Front Splitter, support rods
Grill Mesh
Side Skirts - FRP -2pcs.
Front Over-Fender set +65mm - FRP -4pcs.
Rear Over-Fender set +90mm - FRP -4pcs.
Rear Under Diffuser +60mm - FRP -1pc.
Front Canards - FRP - 2pcs.
Side Canards - FRP - 4pcs.
Rear Canards - FRP - 6pcs.

Optional wing sets (sold separately)
Rear "Duck-tail" wing - FRP - 1pc.
Rear GT Wing set - FRP - 1pc.

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Duck Tail Wing  from the Version 2 Kit.
Also compatiable with the Version 1 Aero kit (without the GT-Wing)

See our blog for more details

Optional DAI. Exclusive Canard set(6 pieces) for Rocket Bunny Ver.2 kit for FR-S/ BRZ

Custom made canards for Dai Yoshihara’s Formula D race car is now available to all the Rocket Bunny Ver.2 kit owners.
TRA Kyoto Designed

6 piece /  Material: FRP - NOW AVAIABLE ONLY THROUGH www.ShopGReddy.com 

* to be used with Rocket Bunny Version 2 FR-S/BRZ wide-body aero kit, sold separately
 

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Front Bumper  from the Version 2 Kit.
FRP -

  *Sold Seperately:

      V2 LED Lights - 17010230*
      V2 Grill Mesh - 17010239*
      V2 Front Splitter - 17010237*
      V2 Front Fenders - 17010234*

See our blog for more details

Optional Side Brake Duct Set for Rocket Bunny Ver.1 kit for FR-S OEM Front Bumper

Material: FRP

* to be used with Rocket Bunny Version 1 FR-S  wide-body aero kit, sold separately

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Front Splitter  from the Version 2 Kit.
Plastic -

  *Sold Seperately:

      V2 OMP Rods - 17010238*  - ($75.)
      V2 Front Bumper - 17010231"
      V2 LED Lights - 17010230*
      V2 Grill Mesh - 17010239* - ($65.)
      

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Side Skirts  from the Version 2 Kit.
FRP -

  *Sold Seperately:

      V2 Front Fenders - 17010234*
      V2 Rear Fenders - 17010235*

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Under Diffuser  from the Version 2 Kit.
FRP - (trimming of the stock OEM rear bumper is required)

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Front Fenders & Front covers for the Bumper  from the Version 2 Kit.
FRP -  (extensive trimming of the OEM fenders is required)

  *Sold Seperately:

      V2 Front Bumper - 17010231"
      V2 Side Skirts - 17010232*
      V2 Rear Fenders - 17010235*   

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

Rear Fenders & Rear trim for the Bumper  from the Version 2 Kit.
FRP -  (extensive trimming of the OEM fenders is required)

  *Sold Seperately:

      V2 Front Fenders - 17010234"
      V2 Side Skirts - 17010232*
   

See our blog for more details

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Complete 19pcs. Kit
GReddy X Rocket Bunny Wide-body Aero Kit with GT Wing - Version 1.

1.  Front Lip Spoiler - FRP (FR-S / 86 bumper requried)  -1pc.
2.  Side Skirts - FRP -2pcs.
3.  Front Over-Fender set  +45mm - FRP -4pcs.
4.  Rear Over-Fender set  +70mm - FRP -4pcs.
5.  Rear Under Diffuser  +60mm - FRP -1pc.
6.  GT Rear Wing set  - FRP -7pcs. 

See our blog for more details

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

GReddy X Rocket Bunny Wide-body Aero Kit  (12pcs.) - Version 1. w/o GT Wing

Front Lip Spoiler - FRP (FR-S / 86 bumper requried)  -1pc.
Side Skirts - FRP -2pcs.
Front Over-Fender set  +45mm - FRP -4pcs.
Rear Over-Fender set  +70mm - FRP -4pcs.
Rear Under Diffuser  +60mm - FRP -1pc.

 - GT Rear Wing can be purchased seperately p/n 17010216 - FRP 
           or see our complete kit with the GT Rear Wing p/n 17010224  

for more info, see our blog

- Instructions

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

GReddy  Street Aero Kit  (non-widebody)  

Front Lip Spoiler - FRP
Side Skirts - FRP
Rear Side Underspoilers - FRP

Rear Wing sold seperately p/n 17010206

TBA

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

GReddy X Rocket Bunny Wide-body Aero Kit, Ver.1

GT Rear Wing only 
   1600x380mm GT Wing plane with uprights and trunk mounts.
        *(hold drilling required) 

           or see our complete kit with the GT Rear Wing p/n 17010224  

for more info, see our blog

Scion FR-S 
ZN6 (4U-GSE)

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Front Lip Spoiler from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 

Front Lip Spoiler - FRP (Scion FR-S / Toyota 86 bumper requried)  -1pc.
 - Extends vehicle length by 55mm
 - Installs on factory Scion FR-S Bumper (or Toyota 86)

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Side Skirts  from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 

Side Skirt - FRP -2pcs.
 - requires some drilling for installation

See our blog for more details

Scion FR-S 
ZN6 (4U-GSE) 

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Front Over-Fender and Bumper Trim from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 

Front Over-Fender set +40mm - FRP -4pcs.
 - installs on factory front fender. 
 - fender trimming required
 - bumper trim pieces only designed for FR-S or 86 front bumper

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Rear Over-Fender and Bumper Trim from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 

Rear Over-Fender set +65mm - FRP -4pcs.
 - installs on factory fender. 
 - fender trimming required
 

See our blog for more details

Scion FR-S / Subaru BRZ
ZN6 (4U-GSE) / ZC6 (FA20)

TRA Kyoto Designed

_{Video of our demo FR-S with the GReddy X Rocket Bunny Kit from JDM Clips}

Rear Under Diffuser  from the Version 1.
GReddy X Rocket Bunny Wide-body Aero Kit 

Rear Under Diffuser +60mm - FRP -1pc.
 - extends vehicle length by 60mm
 - trimming of factory rear bumper required
 

See our blog for more details

also fits Subaru BRZ

(ZN6) 4U-GSE / (ZC6) FA20

Carbon-Fiber Damper with ball and cop joints (all black finish)

Application Specific Hood and Fender mounts

Designed for OEM weight hoods.
(use with aftermarket hoods are not recommended)

Set of 2 Carbon Dampers and Mounts. LH & RH

Neodymium Oil Pan Drain Plug

Also fits Subaru BRZ (FA20)

Magnetic tip

MD-04 (M16xP1.5) fits Scion FR-S, Subaru BRZ, & Toyota 86

for more details, please see our (blog post)

GReddy Sports Oil Filter OX-04

Also fits Subaru BRZ (FA20)

MD-04 (M20xP1.5, 68mm Dia., 65mm Tall) fits Scion FR-S, Subaru BRZ, & Toyota 86

(Vehicles using a GReddy Oil Cooler will use OX-01 Oil Filter 13901101)

GReddy N-Type Radiator Cap(s)

   Also fits Subaru BRZ (FA20)

1.3kg/cm² (127kpa)  pressure 

Cap Finish Options:

  13911001 - Black
  13911003 - Polished
  13911005 - Brushed

* Radiator Cap and Upper Water Temp Adapter sold separately

Also fits Subaru BRZ (FA20)

N-Type Cap, 8mm Hoses

recommend to use with GReddy Hose Adapter