Nissan VR38DETT (R35) GTR

[DISCONTINUED]

The ideal exhaust for the R35 GT-R is the 94mm GReddy Supreme TI. The design provides great performance for upgraded GT-Rs but still comfortable for milder GT-Rs. The large dual oval mufflers provide excellent sound suppression and sound quality, while large piping frees up power for the twin turbo VR engine. This version comes with a huge dual 80mm (3.15") to 94mm (3.7") Y-pipe. The construction is made up of carefully hand-built 94mm piping is pain-painstakingly "inch-welded" for excellent fitment and flow. Revised larger 125mm quad staggered Tips complete each 94mm R35 GReddy Supreme Ti system. 

[MOTO IQ In depth exhaust install feature]    SOUND CLIP

   (2017-on will remove exhaust valve and will require tuning to avoid check code)

Chassis: R35
Engine: VR38DETT
Type: Titanium Y-back system 
  with dual sideways mounted oval mufflers & GReddy logo bracket

Number of pieces: 3
Piping: 2x 80mm - 1x 94mm (3.7") - 2x 80mm (3.14")
Tip(s): 4x 125mm (4.9") Burnt-TI finish *updated
Gasket(s):  2x SS V-band clamps 
Resonator: No

Weight: 29lbs (-31lbs)
Sound level: TBA dB(a)

HP: +TBA hp
TRQ: +TBA ft-lbs

*For USA customers, this product is for competition (racing) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing. It is illegal in the USA, to drive a vehicle on public roads or highways with this product installed.

Notes:  use factory oval gasket at Y-pipe
for more details, please see our (Blog post)

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

*See our full list of R35 GT-R products*

R35 GTR  (Japanese Spec - Special Order)

  (2017-on will remove exhaust valve and will require tuning to avoid check code)
 *2017-on GTR is for Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(PE-R SUS) -Stainless-steel single to Quad with  quad Spectrum Elite tips

90mm to quad 60mm, quad inline mufflers, 4x 115mm tips

91dB(L)-92dB(R) / 4800RPM

2pcs. - cat-back

ideal for use with GReddy Circuit Spec Y-pipe & Front Pipes

For more details, please see our  (GR-9 Blog)

Super Street Titan Muffler-section (Titanium) R35 90#-60#X4-115#X4

  (2017-on will remove exhaust valve and will require tuning to avoid check code)
 *2017-on GTR is for Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

* For grades other than the MY17 Pure Edition with a genuine titanium muffler with a genuine valve, removing the genuine muffler will cause the engine check lamp to light up and make it impossible to run. Therefore, measures such as rewriting the ECU will be required.

485ps car and 530ps car of 10/04-11/10 are not applicable

Not compatible with GT-R NISMO (600PS)

■ Minimum ground clearance: 116mm [Flange]

[DISCONTINUED in USA]

R35 (VR38DETT) w/ stock frame turbos

GReddy Circuit Spec Front (down) Pipes (2pcs. LH/RH)

Dia. 76.3mm SUS

ideal for use with GReddy spec. Y-pipe and PE-R exhaust.

(*removes primary LH / RH catalyic conveters)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

GReddy Full Widebody aero kit
  Front Lip, Front Over Fenders, & Rear Overfenders
    p/n 17520254 - $3100. (save $680)

2017-on Nissan GT-R
  (not compatiable with Nismo model)

- Raw black gel-coat, FRP Fiberglass construction
- Designed and made in Japan

Full kit includes:
  p/n 17020251   Front Lip   - $1050.
  p/n 17520252   Front Over Fenders (+75mm) - $1365.
  p/n 17520253   Rear Over Fenders  (+75mm) - $1365.

*R35 GTR　MY17　Tire&Wheel　for GReddy WIDE BODY KIT
  Front : RAYS　G25　20in-11j inset 15 Spacer 25㎜ +α
  Rear : RAYS　G25　20in-11j inset 15 Spacer 65㎜ +α
     Tire Size : Fr/Rr 285/35-20

Initially developed for competition on the FIA Intercontinental Drifting Cup winning, 2017 TRUST Racing D1 R35 GT-R, is the new GReddy R35 MY17 Widebody Aero Kit. The five piece aero kit enhances and refines the muscular look of 2017-on model year Nissan GT-R. It replaces the factory front lip with a more flowing and stylish lip spoiler. The dynamic front and rear over-fender sets add 75mm in width on each side. This makes it possible to house wider or more aggressive off-set wheels and tires for both competition use and/or flawless vehicle stance. The GReddy aero kit was designed and is manufacturer in Japan, with only the finest FRP materials and craftsmanship. The kit can be ordered as a full kit or purchased individually as a front lip, front over-fender set or rear over-fender set.

GReddy Full Widebody aero kit
    p/n 17020251 Front Lip - $1050.

2017-on Nissan GT-R
  (not compatiable with Nismo model)

 - Raw black gel-coat, FRP Fiberglass construction
 - Designed and made in Japan

Initially developed for competition on the FIA Intercontinental Drifting Cup winning, 2017 TRUST Racing D1 R35 GT-R, is the new GReddy R35 MY17 Widebody Aero Kit. The five piece aero kit enhances and refines the muscular look of 2017-on model year Nissan GT-R. It replaces the factory front lip with a more flowing and stylish lip spoiler. The dynamic front and rear over-fender sets add 75mm in width on each side. This makes it possible to house wider or more aggressive off-set wheels and tires for both competition use and/or flawless vehicle stance. The GReddy aero kit was designed and is manufacturer in Japan, with only the finest FRP materials and craftsmanship. The kit can be ordered as a full kit or purchased individually as a front lip, front over-fender set or rear over-fender set.

GReddy Full Widebody aero kit
p/n 17520252 Front Over Fenders (+75mm) - $1365.

2017-on Nissan GT-R
  (not compatiable with Nismo model)

 - Raw black gel-coat, FRP Fiberglass construction
 - Designed and made in Japan

* R35 GTR　MY17　Tire & Wheel for GReddy WIDE BODY KIT
   Front : RAYS　G25　20in-11j inset 15 Spacer 25㎜ +α
   Rear : RAYS　G25　20in-11j inset 15 Spacer 65㎜ +α
     Tire Size : Fr/Rr 285/35-20

Initially developed for competition on the FIA Intercontinental Drifting Cup winning, 2017 TRUST Racing D1 R35 GT-R, is the new GReddy R35 MY17 Widebody Aero Kit. The five piece aero kit enhances and refines the muscular look of 2017-on model year Nissan GT-R. It replaces the factory front lip with a more flowing and stylish lip spoiler. The dynamic front and rear over-fender sets add 75mm in width on each side. This makes it possible to house wider or more aggressive off-set wheels and tires for both competition use and/or flawless vehicle stance. The GReddy aero kit was designed and is manufacturer in Japan, with only the finest FRP materials and craftsmanship. The kit can be ordered as a full kit or purchased individually as a front lip, front over-fender set or rear over-fender set.

GReddy Full Widebody aero kit
  p/n 17520253 Rear Over Fenders (*75mm) - $1365.

2017-on Nissan GT-R
  (not compatiable with Nismo model)

 - Raw black gel-coat, FRP Fiberglass construction
 - Designed and made in Japan

* R35 GTR　MY17　Tire & Wheel for GReddy WIDE BODY KIT
    Front : RAYS　G25　20in-11j inset 15 Spacer 25㎜ +α
    Rear : RAYS　G25　20in-11j inset 15 Spacer 65㎜ +α
       Tire Size : Fr/Rr 285/35-20

Initially developed for competition on the FIA Intercontinental Drifting Cup winning, 2017 TRUST Racing D1 R35 GT-R, is the new GReddy R35 MY17 Widebody Aero Kit. The five piece aero kit enhances and refines the muscular look of 2017-on model year Nissan GT-R. It replaces the factory front lip with a more flowing and stylish lip spoiler. The dynamic front and rear over-fender sets add 75mm in width on each side. This makes it possible to house wider or more aggressive off-set wheels and tires for both competition use and/or flawless vehicle stance. The GReddy aero kit was designed and is manufacturer in Japan, with only the finest FRP materials and craftsmanship. The kit can be ordered as a full kit or purchased individually as a front lip, front over-fender set or rear over-fender set.

R35 (VR38DETT) 

GReddy (AVC) Adapter Voltage Correction unit

Allow for upgrading the size of the Air Intake piping for the Air Flow Meters.

850hp for 70mm Dia. / 1000hp for 80mm Dia.

(Special order item)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Long Type piping 60-70mm

Aluminum

2x Airinx AY-SB

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Long Type piping, Larger 60-80mm diameter piping

*(requires ECU re-calibration for larger diameters)

Aluminum

2x Airinx AY-SB

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

VR38DETT

High Flow Fuel Rail Set (right and left banks)

14mm main tube, with -8 AN - M16 fittings

for more info, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(R35) VR38DETT

2x BOV Type FV2 (Floating Valve) w/ adapters (BFV2-233)

for stock piping

recirculates back into air intake

^{*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.}

(R35) VR38DETT

For factory Intake

Aluminum Hard Piping Kit (70mm)

with 2x FV-2  Blow-off Valves

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Engine: VR38DETT

Years: 07.12-on


GReddy Intercooler Kit
2x Type06 Core Dim: L260 / H265 / W100 mm


for stock frame turbos
air ducting


* GReddy pipe set compatiable 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

[DISCONTINUED]  - superceded by FV-2 Blow off Valve version p/n 12020224 *

Engine: VR38DETT

Years: 09-16


GReddy Intercooler Kit with 2x Type FV Blow off Valves
Type29F Core Dim: L710 / H302 / W100 mm


for GReddy TD06-20G Turbo Kit
compatiable with stock frame turbos with use of GReddy suction kit.
optional GReddy Washer Tank available

* GReddy pipe set compatiable 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Engine: VR38DETT

Years: 09-16


GReddy Intercooler Kit with 2x Type FV2 Blow off Valves
Type29F Core Dim: L710 / H302 / W100 mm


for GReddy TD06-20G Turbo Kit
compatiable with stock frame turbos with use of GReddy suction kit.
optional GReddy Washer Tank available

* GReddy pipe set compatiable 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

Engine: VR38DETT

Years: 12-16
 

Aluminum Windsheild wiper washer tank replacement
for use with GReddy R35 GT-R Intercooler Kit 

  Note:  un-wrap the washer pump harness to lengthen the harness.

Engine: VR38DETT

Years: 17-on  - ideal for use with MY17 on DCT kit p/n 12024814
 

Aluminum Windsheild wiper washer tank replacement
for use with GReddy R35 GT-R Intercooler Kit 
 

Engine: VR38DETT

Years: 09-16


GReddy Intercooler Kit with 2x Type FV-2 Blow off Valves, with special piping for GReddy RX Intake Manifold
Type29F Core Dim: L710 / H302 / W100 mm


for GReddy TD06-20G Turbo Kit and specifically the GReddy RX Intake Manifold
compatiable with stock frame turbos with use of GReddy suction kit.
optional GReddy Washer Tank available

*pipe kit specifically for RX Intake Manifold
 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(MY17  R35) VR38DETT

specfically for 2017-on model years

6speed DCT

Dual Clutch Transmission
Cooler Kit
parrallel system, with spl.
internal Thermostat adapter,
hardlines, etc.
Mounts left front corner
with FRP ducting

for more details, please see our (blog post)

also see: 12024810 DCT Cooler Kit for 2009-11 GT-R model years
               12024811 DCT Cooler Kit for 2012-16 GT-R model years

* Optional MY17 R35 GTR Washer Tank p/n 13526111 sold separately

(DBA  R35) VR38DETT

specfically for 2012-16 model years

6speed DCT

Dual Clutch Transmission
Cooler Kit
parrallel system, with spl.
internal Thermostat adapter,
hardlines, etc.
Mounts left front corner
with FRP ducting

for more details, please see our (blog post)

also see: 12024814 DCT Cooler Kit for 2017-on GT-R model years
               12024810 DCT Cooler Kit for 2009-11 GT-R model years

(CBA  R35) VR38DETT

specfically for 2009-11 model years

6speed DCT

Dual Clutch Transmission
Cooler Kit
parrallel system, with spl.
internal Thermostat adapter,
hardlines, etc.
Mounts left front corner
with FRP ducting

  *also see 12024811 for a DCT Cooler Kit for  2012-16 models
                 12024814 for a DCT Cooler Kit for 2017-on models

for more details, please see our (blog post)

(R35) VR38DETT

6speed DCT Transmission fluid

20 liters

Type-RX formula

[DISCONTINUED]

(R35) VR38DETT

6speed DCT

Dual Clutch Transmission billet oil pan 

Improved oil cooling

with increased inner ribbing for better oil control

includes 5000Gauss NEO Magdrain bolts

Two draining points for more complete fluid change

(replacement DCT Fluid - GReddy Type-RX p/n 1751302)

(R35) VR38DETT

RX big bore billet throttle bodies

Use factory electronic throttle body components

75mm mounting dia., 68mm butterfly dia., 70mm plenum dia.

Anodized Aluminum finish

*special gasket included

**drive by wire motor, acessories & sensors not included (uses OEM)

***Must purchase 80-70mm silicone hose reducers  (x2) and hose clamps (x4) if using in conjunction with GReddy RX Intake Manifold Spl Piping Kit, part# 13920401

Use with GReddy RX Intake Manifold p/n 13522330

For more info see: our Blog.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

_{**Late 2011-on owners, please call us for details- 949-588-8300}

[DISCONTINUED IN THE USA]

(R35) VR38DETT

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Cast Aluminum high-flow intake Manifold for VR engine

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2
 

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*also see our 2nd Variation with optional Sub-Injector provisions. p/n 13522331

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

[DISCONTINUED IN THE USA]

(R35) VR38DETT

Cast Aluminum high-flow intake Manifold for VR engine with additional Injector Bosses  
UPDATE: (now pre-drilled, with include billet plugs)

For extra high horsepower applications.  This RX SPL manifold features 6 boss locations to allow for 6 additional injectors to be positioned at the base of each runner for secondary injectors.  

The throttle mounting position has been reviewed by flow simulation analysis to distribute between each cylinder equally. Also both the inertia supercharging efficiency and the maximum power were considered. So the tank capacity has designed as bigger 82% than genuine one.
The suction efficiency at the middle range revolution and the response have improved by funnel shape of the intake port. Due to the port diameter extended Dia 58 from Dia 56, the increased air volume at the high revolution can inhaled from the tank effectively.

Larger volume , for high horsepower applicaitons.

3 pices, larger runners (58mm), 2x large volume end tanks (+85%)

※ Requires 1/8 PT Screw machining on the stock balance tube for installing a blowby union.

* factory thorttle body compatiable.  or  ** RX Billet Throttle Kit.

For more details please see our Blog post 1 & Blog post 2 & Blog post 3
 

*use Special Piping Kit for GReddy RX Intake manifold, p/n 13920401

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(R35) VR38DETT

Special Aluminum Piping kit for RX Intake Manifold equipped

R35 GT-Rs

MPORTANT – Can only be used in conjunction with GReddy Type 29F Intercooler. Will not work with OEM intercooler or other aftermarket intercoolers.

*Must purchase 80-70mm Silcone Hose Reducer (x2) and hose clamps (x4) if using in conjunction with GReddy RX Throttle Bodies, part# 13920460

For more details on the RX Intake Manifold please see our Blog post.

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

Complete GReddy Built VR Stroker Engine

Long Block - Heads, Cams, Block, Crank, Rods, Pistons

Call for Options -

• GR38  (stock bore & stroke) -  Treated Block, 95.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, Balanced Crankshaft, & Cylinder Head Options
• GR40  (Big Bore) - Treated Sleeved Block, 98.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, Balanced Crankshaft, & Cylinder Head Options
• GR40  (Stroker) - Treated Block, 95.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, 92.4mm Stroker Crankshaft, & Cylinder Head Options
• GR43  (Bored & Stroked) -Treated Sleeved Block, 99.5mm (or 98.5) Bore Forged Pistons, Forged H-Beam Connecting Rods, 92.4mm (or 94.4) Stroker Crankshaft, & Cylinder Head Options

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

Complete GReddy Built VR Stroker Engine

Long Block - Block, Crank, Rods, Pistons

Call for Options

• GR38 (stock bore & stroke) - Treated Block, 95.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, Balanced Crankshaft
• GR40 (Big Bore) - Treated Sleeved Block, 98.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, Balanced Crankshaft
• GR40 (Stroker) - Treated Block, 95.5mm Bore Forged Pistons, Forged H-Beam Connecting Rods, 92.4mm Stroker Crankshaft
• GR43 (Bored & Stroked) -Treated Sleeved Block, 99.5mm (or 98.5) Bore Forged Pistons, Forged H-Beam Connecting Rods, 92.4mm (or 94.4) Stroker Crankshaft

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

Complete GReddy Built Racing Heads

CNC, Ported Heads

Call for Options

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(R35) VR38DETT

1x NGK R2558A-9 Racing Competition Spark Plug (with resistor)

0.55dia Electrode: Center Iridium / External Platinum
(angled ground strap ignition unit shape)

Heat Range 9 (cold)

Long Reach type plug  12mm x 26.5mm, 14mm socket

*GT-R requires 6 spark plugs. 

JDM Spec NGK 22401-RS080-09

NGK spark plugs are used in many different racing formats, including N1 racing. This is a highly reliable spark plug that features better ignition performance and reduced electric discharge voltages. A redesign of the ignition section tip has provided improved anti-smoldering or fouling characteristics.

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.

R35   VR38DETT  (OEM engines)

0.8mm thick / 96mm bore (for OEM Bore Pistons)

Set of 2 Metal Head Gaskets 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

R35   VR38DETT   (for big bore engines)

0.8mm thick / 99mm bore (for 98.5 Bore Pistons)

Set of 2 Metal Head Gaskets 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

R35   VR38DETT  (big bore engines)

0.8mm thick / 100mm bore (for 99.5 Bore Pistons)

Set of 2 Metal Head Gaskets 

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

CNC Billet Piston Set 6x

Call for Options

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

Forged Piston Set 6x

Call for Options

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

DISCONTINUED

(R35) VR38DETT

Forged H-Beam Connecting Rods Set 6x

Call for Options

for more details, please see our (blog post)

*For Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

(R35) VR38DETT

BenSopra Wide-Body Aero Kit (complete)

w/ one piece front end

BenSopra, Japan

for more details, please email us at shop@greddy.com

(R35) VR38DETT

Oil Catch Tank

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Tow Hook 

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

400mm Big Brake Rotor Upgrade - Front

light-weight 2 piece design, with caliper extension bracket.

(slotted design improves on known OEM cross drilled brake rotor failure)

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

400mm Big Brake Rotor Upgrade - Rear

light-weight 2 piece design, with caliper extension bracket.

(slotted design improves on known OEM cross drilled brake rotor failure)

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Bonnet (Hood) - FRP (Fiberglass) -White

Vented Hood with relocated inlets for extra engine room cooling.

*Also includes Top Secret Vent covers (& travel bag) for rain days or car washing.

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Bonnet (Hood) - Carbon

Vented Hood with relocated inlets for extra engine room cooling.

*Also includes Top Secret Vent covers (& travel bag) for rain days or car washing.

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Front Bumper Intake Grill - Carbon

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Carbon Fiber Side Diffuser

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

Carbon Fiber Rear Side Diffuser

Top Secret, Japan

for more details, please see our (blog post)

(R35) VR38DETT

The Dodson Super Stock 650ft/LBS 7 plate clutch was developed in conjunction with Exedy using Exedy’s patented friction designed discs and heat treated steels and shims.

This product is suited for the owner who uses his car for hard driving or racing and has made the first stage of increasing the power on his car.

Kit includes:

* 14 Exedy GTR Friction discs
* 12 Exedy GTR steels
* 4 Exedy End Shims
* Seal and clutch instructions

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT

Dodson Sportsman 800ft/LBS 8 plate clutch kit

This kit also comes complete with Dodson's billet high tensile steel clutch baskets and pistons, which are required to make the package work.

This product is suited for the owner that has increased the power of his car to that next level and also races it.

Kit includes:

* HD clutch basket for 1,3,5,R
* HD clutch basket for 2,4,6
* HD piston and “seal for life” for 1,3,5,R
* HD piston and “seal for life” for 2,4,6 and mechanical circlip
* High Temp piston shaft seals
* 16 Exedy GTR friction discs
* 14 Exedy GTR seals
* 4 Exedy GTR end shims
* Seal and clutch instruction

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT

Promax 10 plate clutch kit 1000ft/lbs plus

10 Plate clutch kit, this kit is used in cars with big power and the owner wanting to break records and be sure the clutch is going to handle his future developments.

Comes complete with Dodson's billet high tensile steel clutch baskets and pistons as well as Dodson Motorsport/Exedy patented friction discs and heat treated steel and shims.
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Heavy Duty Front Differential Gear Lock
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Gear Selector Piston 1sensor
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Gear Selector Piston 2sensor
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Mechanical Circlip 1

Dodson mechanical high tensile steel circlip is designed as a direct replacement for the genuine standard circlip. If your GTR is modified and you are racing or driving it hard this part is a must as with continual thrust on the standard circlip it can come off causing catastrophic failure.

 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Mechanical Circlip 2 - 2mm

Dodson mechanical high tensile steel circlip is designed as a direct replacement for the genuine standard circlip. If your GTR is modified and you are racing or driving it hard this part is a must as with continual thrust on the standard circlip it can come off causing catastrophic failure.

 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT- DCT Transmission

Mechanical Circlip 2
OEM
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Oil Pump Upgrade and Repair Kit
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Transmission Filter


Reuseable

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Front Differential Clutch Pack Upgrade
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Upgraded Front Differential Clutch Housing
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Front Differential Clutch Fluid
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

High Performance Differential Oil
Race Proven Dodson Motorsport GR6 fluids contain top quality synthetic base stocks and a high level of top quality additives selected specifically for GR6 dual clutch transmissions.

10 Litters

Attributes:
* Highest quality synthetics and additives available.
* Helps eliminates gear chatter. Quiet running. High film strength.
* Lowers differential temperatures
* DMS High Performance Differential oil offers unmatched friction performance, smooth clutch operation.
* Reduced gear and bearing wear.
* Increased Differential life.
* Stable frictional characteristics eliminating excessive clutch noise and vibration.
* Formulated to deliver responsive yet superior Limited Slip Differential performance.

Above 30°C / 86°F Ambient Temp
Below 30°C / 86°F Ambient Temp
 

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Heavy Duty 1st Gear and Input Shaft Kit

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Heavy Duty 6 Speed Gear Set

Dodson Motorsports

for more details, please see our (blog post)

(R35) VR38DETT - DCT Transmission

Heavy Duty Gear Set - 2nd, 3rd, 4th, 5th, &  6th Gears

Dodson Motorsports

for more details, please see our (blog post)

Nissan GT-R  
R35 

TRA Kyoto Designed  
Pandem Wide-body Aero Kit  (FULL)  

17020600  Pandem R35 Full Widebody Aero Kit (FRP) w/o wing
17020601  Pandem R35 Full Widebody Aero Kit (Dry Carbon) without wing* 
17020612  + Optional Pandem Duck-tail Wing 
17020613  + Optional Pandem (FRP) GT Wing
17020614  + Optional Pandem (Dry Carbon) GT Wing * 

17020603  Front Lip (FRP)
17020604  -  Front Lip (Dry Carbon) only * 
17020602  Front Bumper (must use front overfender) only 
17020605  Front Over Fenders (does not include front extenstions) only
17020606  Rear Over Fenders only  
17020607 Pandem R35 Side Skirts (FRP) only 
17020608 - Pandem R35 Side Skirts (Dry Carbon) only *
17020609 Pandem R35 Rear Side Diffuser (FRP) only 
17020610 - Pandem R35 Rear Side Diffuser (Dry Carbon) only * 
17020611 Pandem R35 Rear Center Diffuser (FRP) only 

^{Click the Buy Now button below to purchase full kits or individual parts...}

_{DISCLAIMER:
This body kit replaces the front OEM turn signal lights with aftermarket DRL LED type lights which can be wired to operate as driving lights and/or turn signals. However these lights are not DOT or E approved as this kit was originally developed for sales in Japan. It maybe unlawful to tamper, remove or replace DOT or E approved items with non-approved lights on street driven motor vehicles. The included DRL / signal lights should only be installed and used for off-road, competition show purposes, not for public street or highway use. Please be sure to check with your local and federal laws before purchasing or installing.} 

Nissan GT-R  
R35 

TRA Kyoto Designed  
(CG Renderging shown, actual production items my change slighly)

Rocket Bunny Wide-body Aero Kit  (FULL)  w/ wing

Front Bumper - FRP
Front Lip Upper - FRP
Front Lip Lower - FRP
Front Lip Plate - FRP
Front Canards - FRP
F Front Canards - FRP
Side Canards - FRP
Front Fenders - FRP
Rear Fenders - FRP
Rear Diffuser - FRP
Rear Diffuser Brackets - Alum
Wing - FRP
Wing Brackets - Alum
Wing Rods - 
Turn Signal Lights -

for more see our GReddy-GR9.blogspot

* Based on the aero for the GReddy D-Concept GT-R for the D1GP  see: (here)

_{DISCLAIMER:
This body kit replaces the front OEM turn signal lights with aftermarket DRL LED type lights which can be wired to operate as driving lights and/or turn signals. However these lights are not DOT or E approved as this kit was originally developed for sales in Japan. It maybe unlawful to tamper, remove or replace DOT or E approved items with non-approved lights on street driven motor vehicles. The included DRL / signal lights should only be installed and used for off-road, competition show purposes, not for public street or highway use. Please be sure to check with your local and federal laws before purchasing or installing.}