All Exhaust

Exhaust systems have always been the base for aftermarket performance. From the beginner starting off to the high horsepower racer, who need to comply to track sound requirements, a well engineered exhaust system will enhance performance, sound, appearances, and economy. Upgrading restrictive factory exhaust with a tuned straight-through GReddy and GPP Exhaust System will increase horsepower & torque, add a deep sporty exhaust note, give style & flare to the look of your car, all while increasing fuel efficiency.
  *Please check your local state and county laws regarding vehicle modification, before purchasing.

                                                            *WARNING: Cancer & Reproductive Harm
www.P65warnings.ca.gov





Car Make Car Model Car Year Description PART #
Exhaust Gasket Replacement

GPP 60mm Oval Exhaust Gasket

11000323
Car Make: Exhaust Gasket
Car Model: Replacement
Car Year:
Notes:

60mm, 2 bolt, metal-composite exhaust gasket

This is the most common fitment for a GReddy gasket.
Found on most normally-appropriated applications in:

GReddy EVO3, RS, SP Elite, SE, Racing Ti-C, EVO2, SP2, G2S, MX, EVO, EVOTT, PE & SP

 

11000301 SUPERSEDED WITH 11000323 

Part #: 11000323
Price:
6.00Buy Now
IMAGES:
Exhaust Gasket Replacement

GPP 70mm Oval Exhaust Gasket

11000324
Car Make: Exhaust Gasket
Car Model: Replacement
Car Year:
Notes:

70mm, 2 bolt, composite exhaust gasket

This is a common GReddy-size gasket.
Found on many Turbo-charged-N/A and some Turbo
applictions in:

GReddy EVO3, RS, SP Elite, SE, Turbo Ti-C, EVO2, SP2, EVOTT

 

11000302 SUPERSEDED WITH 11000324

Part #: 11000324
Price:
9.00Buy Now
IMAGES:
Exhaust Gasket Replacement

GPP 80mm Oval Exhaust Gasket

11000325
Car Make: Exhaust Gasket
Car Model: Replacement
Car Year:
Notes:

80mm, 2 bolt, composite exhaust gasket

This is a common GReddy-size gasket.
Found on most large Turbo applications in:

GReddy EVO3, RS, SP Elite, SE, Racing Ti-C, EVO2, SP2, Racing Ti, EVO, EVOTT, MX, SP, & PE

11000305 SUPERSEDED WITH 11000325

Part #: 11000325
Price:
8.00Buy Now
IMAGES:
Exhaust Gasket Replacement

GPP 2.5" Oval Exhaust Gasket

11000326
Car Make: Exhaust Gasket
Car Model: Replacement
Car Year:
Notes:

2.5" (63.5mm), 2 bolt, composite exhaust gasket

This is the most common replacement gasket.
Found on most normally-aspirated applications in:

GReddy EVOlution GT, Supreme SP, Revolution RS, & GPP RS-RACE, RS-Ti

Part #: 11000326
Price:
6.00Buy Now
IMAGES:
Exhaust Gasket Replacement

GPP 3.0" Oval Exhaust Gasket

11000327
Car Make: Exhaust Gasket
Car Model: Replacement
Car Year:
Notes:

3.0" (76mm), 2 bolt, composite exhaust gasket

This is the most common  gasket size.
Found on most Turbo and (RS normally-aspirated) applications in:

GReddy EVOlution GT, Supreme SP, Revolution RS, GPP RS-Race & GPP RS-Titanium

Part #: 11000327
Price:
9.00Buy Now
IMAGES:
Acura Integra 1994-01

GReddy Supreme SP Exhaust - NEW

10158218
Car Make: Acura
Car Model: Integra
Car Year: 1994-01
Notes:

Fits:
   1994-01 Integra RS / LS (w/  B18B-series engine)
    2000-01 Integra GSR (w/  B18C-series engine)

The classic SP exhaust for iconic (DC) Acura Integra has returned, but this time this Supreme SP is designed with larger diameter piping to suit tuned 94-01 Integra LS/RS and 00-01 Integra GSR. Ideal for bolt-on turbo or supercharger kits or high-flow N/A applications, this version features large diameter 76mm (3”) muffler and piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the B18 engine’s RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  DC
Engine:  B18 (94-01 B18 LS / RS & 00-01 B18C GSR)
Type:    Cat-Back Exhaust

Number of pieces:  3 pcs
Piping:   76 mm (3 ") - slight taper of 2.5" to fit the factory catalyic-conveter 
Tip:   105mm (4.1")
Gasket(s):   3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs 
Sound level:  TBA dB(a)


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158218
Price:
775.00Buy Now
IMAGES:
Acura TSX 2009-14

GReddy Supreme SP Exhaust

10158203
Car Make: Acura
Car Model: TSX
Car Year: 2009-14
Notes:

The Supreme SP for ’09-’14 Acura TSX offers a refine exhaust note with elegant styling to match. The classic dual oval muffler system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the exhaust note comes to life with a deep rich GReddy sound. The muffler and tip best match the TSX’s aero styling. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

 

SOUND CLIP

Chassis:  CU2
Engine:  K24A2
Type:   Dual Muffler Cat-Back Exhaust

Number of pieces:  4pcs
Piping:   63.5 mm (2.5 ")
Tip:   102 mm (4.0 ")
Gasket(s):   70mm oval (qty: 3 included) replacement
Resonator:   Yes

Weight:  51.9 lbs 
Sound level:  84 / 85 dB(a) @4500

HP:  +3  hp
TRQ:  +3  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158203
Price:
1150.00Buy Now
IMAGES:
Chevrolet Corvette 2006-13

GReddy EVOlution GT Exhaust (with carbon cover)

10188301
Car Make: Chevrolet
Car Model: Corvette
Car Year: 2006-13
Notes:

[DISCONTINUED]

The EVOlution GT, for the Z06 Chevrolet Corvette, combines the best of GReddy’s 40 years of exhaust design expertise, in one unique system. Increased performance, refine exhaust note, and a substantial weight savings come through a creative layout with our distinctive dual EVO mufflers. Large 76mm (3”) mandrel-bent piping is configured with a superior “X-pipe." It is then linked to a set of our compact, but highly-efficient, straight-through, mufflers and twin center-exit, 115mm (4.5”) GReddy slash cut tips. To complete the look, a GReddy Carbonfiber Tip Finshier is included to accent the EVO GT exhaust.   In dyno tests, the system gains the Z06, 27.2whp / 34.7ft-lb of performance, while producing just an 8-10 decibel increase in sound, (at idle and our test RPM = ¾ redline, 5250). By eliminating the heavy OEM valve system and unnecessary tips, weight is reduced by 34% (-24.2lbs.) Fitment and installation is top notch and straight forward, with better-then OEM investment cast stainless-steel GReddy flanges. (There is no cutting or sloppy slip-on joints to figure out.) Like all GReddy EVOlution GT systems, they are all made from fully hand-welded, 304 stainless-steel and each exhaust carries a GReddy Limited Lifetime Warranty.

  * Includes - GReddy Carbon Tip Finisher
 

SOUND CLIP

Chassis: Z06
Engine: 7.0L LS V8
Type: dual Cat-back
       (Exhaust configuration Dual muffler with X pipe and center exit tips and Carbon Finisher)

Number of pieces: 3pcs
Piping: 76 mm (3.0")
Tip(s): 2x 115 mm (4.5")
Gasket(s): 3.0" oval (qty: 4 included) replacement
Resonator: n/a

Notes: large diameter, light-weight stainless-steel system

Weight: 47.2 lbs (oem 71.7 lbs)
Sound level: TBA dB(a) @5250RPM

Dyno Chart
HP: 27.2 hp
TRQ: 34.72 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10188301
Price: 1300.00
IMAGES:
Ford Focus ST 2013-17

GReddy Supreme SP Exhaust

10148203
Car Make: Ford
Car Model: Focus ST
Car Year: 2013-17
Notes:

The Supreme SP for the Ford Focus ST combines, classic GReddy styling and sound to boost power from the modern American EcoBoost powerplant. Large 76mm (3”) diameter mandrel piping is carefully routed beneath ST chassis through two inline, compact Supreme SP straight-through muffler sections. Dual 102mm (4”) GReddy double walled tips perfectly finish-off the system through the center exit bumper. Power tests have shown substantial increase in mid-range power and torque, with peak gains of 24whp and 11ft.lbs. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
 

SOUND CLIP

Chassis:  Global C Platfrom
Engine: EcoBoost
Type:   Cat-back exhaust, center exit
 

Number of pieces:  4pcs.
Piping:   76 mm (3.0")
Tip(s) 2x 102 mm (4.0")
Gasket(s):    3.0 " oval (qty: 3 included) replacement
Resonator:   Yes
 

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 96 dB(a)
 

HP:  +24.52 hp
TRQ:  +11.98 ft-lbs
 

NOTE(S): *kit includes spacers to remount the under brace lower, to make clearance for the larger diameter piping.

DYNO GRAPH ]


  * Best match - GReddy 76mm MX Racing Down-pipe (sold separately)  p/n 10590701


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10148203
Price:
900.00Buy Now
IMAGES:
Ford Fiesta ST 2015-on

GReddy EVOlution GT Exhaust

10148306
Car Make: Ford
Car Model: Fiesta ST
Car Year: 2015-on
Notes:

[DISCONTINUED] - no longer in production.

 

The EVOlution GT for the Ford Fiesta ST provides great sound with a good boost in performance and looks. The large 76mm (3”) mandrel bent piping help expel exhaust gases from the Fiesta’s 1.6L Ecoboost engine to the tune of 9hp and 8ft-lbs of torque, on a completely stock ST. Sound is controlled to a deep sophisticated growl with the use of our straight-though EVO muffler and large resonator. The unique design of our compact EVO muffler with off-set 105mm (4.1”) tip allow for a stylish fitment; fitting for the sporty ST model. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP


Chassis: 6th Gen.
Engine: 1.5L GTDI
Type: 3" Cat-back


Number of pieces: 3pcs
Piping: 76 mm (3.0")
Tip(s): 105 mm (4.13")
Gasket(s): 3.0" oval (qty: 2 included) replacement (+1x composite gasket)
Resonator: yes

Notes: 

Weight: 29.1 lbs (stock 31.2)
Sound level: 91 dB(a) @4875RPM (stock 84dB(a)

Dyno Chart
HP: 9 hp
TRQ: 8 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10148306
Price:
850.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 115 x L 170

Replacement RS SUS 304 Tip(s) 115mm Dia. x L170mm

11001142
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 115 x L 170
Notes:

1x GReddy Revolution RS Tip Dia115 x L170 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 170mm (6.69")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001142
Price:
55.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 115 x L 150

Replacement RS SUS 304 Tip(s) 115mm Dia. x L150mm

11001141
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 115 x L 150
Notes:

1x GReddy Revolution RS Tip Dia115 x L150 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 50mm (5.9")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001141
Price:
55.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 105 x L 120

Replacement RS SUS 304 Tip(s) 105mm Dia. x L120mm

11001143
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 105 x L 120
Notes:

1x GReddy Revolution RS Tip Dia.105 x L120 for most 2.5" Revolution (140mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (140mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 120mm (4.7")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS ( GPP RS-RACE & RS-Ti) exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths aviable 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001143
Price:
55.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 105 x L 150

Replacement RS SUS 304 Tip(s) 102mm Dia. x L150mm

11001144
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 105 x L 150
Notes:

1x GReddy Revolution RS Tip Dia.102 x L150 for most 2.5" Revolution (140mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (140mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)

- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 150mm (5.9")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS ( GPP RS-RACE & RS-Ti) exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths aviable 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001144
Price:
55.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 115 x L 120

Replacement RS SUS 304 Tip(s) 115mm Dia. x L120mm

11001140
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 115 x L 120
Notes:

1x GReddy Revolution RS Tip Dia115 x L120 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 120mm (4.7")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001140
Price:
55.00Buy Now
IMAGES:
GReddy Tip RS Ti Turndown Dia 115 x L 120

Optional GReddy RS Turndown Titanium Tip(s) 115mm Dia. x L120mm 

11001150
Car Make: GReddy Tip
Car Model: RS Ti Turndown
Car Year: Dia 115 x L 120
Notes:

Please note: the 11001150 part number will soon be superceed by a new part number 11002121


Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
120mm (4.7") = straight 20mm / turndown 100mm

Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001150
Price:
$140.00Buy Now
IMAGES:
GReddy Tip RS Ti Turndown Dia 115 x L 150

Optional GReddy RS Turndown Titanium Tip(s) 115mm Dia. x L150mm 

11001151
Car Make: GReddy Tip
Car Model: RS Ti Turndown
Car Year: Dia 115 x L 150
Notes:

Please note: the 11001151 part number will soon be superceed by a new part number 11002122


Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
   150mm (5.9") = straight 50mm / turndown 100mm


Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001151
Price:
$150.00Buy Now
IMAGES:
GReddy Tip RS Ti Turndown Dia 115 x L 170

Optional GReddy RS Turndown Titanium Tip(s) 115mm Dia. x L170mm

11001152
Car Make: GReddy Tip
Car Model: RS Ti Turndown
Car Year: Dia 115 x L 170
Notes:

Please note: the 11001152 part number will soon be superceed by a new part number 11002123


Revolution RS Tip: for most 3" Revolution RS, RS-Race, or RS-Ti (160mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 115mm (4.5")
Lengths:
    170mm (6.7") = straight 70mm / turndown 100mm


Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3 section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 115mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001152
Price:
$160.00Buy Now
IMAGES:
GReddy Tip RS Ti Turndown Dia 105 x L 120

Optional GReddy RS Titanium Turndown Tip(s) 105mm Dia. x L120mm 

11002131
Car Make: GReddy Tip
Car Model: RS Ti Turndown
Car Year: Dia 105 x L 120
Notes:

Revolution RS Tip: for most 2.5" Revolution RS, RS-Race, or RS-Ti

(140mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 105mm (4.1")
Lengths:
120mm (4.7") = straight 20mm / turndown 100mm


Material: Titanium
Mounting pattern: RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3-section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 105mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002131
Price:
130.00Buy Now
IMAGES:
GReddy Tip RS Ti Turndown Dia 105 x L 150

Optional GReddy RS Titanium Turndown Tip(s) 105mm Dia. x L150mm 

11002132
Car Make: GReddy Tip
Car Model: RS Ti Turndown
Car Year: Dia 105 x L 150
Notes:

Revolution RS Tip: for most 2.5" Revolution RS, RS-Race, or RS-Ti

(140mm dia.) muffler systems
- Single-wall, 3 piece welded turndown, burnt Titanium Tip with etched GReddy logo at the top of the turndown tip.

Dia.: 105mm (4.1")
Lengths:
150mm (5.9") = straight 50mm / turndown 100mm

Material: Titanium
Mounting pattern: RS Tri-mounting

Optional burnt Titanium turndown tip (3 lengths) GReddy Revolution RS Ti 3-section turndown tip. Exclusively for GReddy Revolution RS, GPP RS-Race and RS-Ti exhausts with 105mm tip diameter.

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

- Also available in 105mm and 115mm SUS304 sizes, and 105mm Titanium Tips

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002132
Price:
140.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 115 x L 185

Optional GReddy RS Titanium Tip(s) 115mm Dia. x L185mm - NEW

11002104
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 115 x L 185
Notes:

1x GReddy Ti Revolution RS Tip Dia. 115 x L170 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 185mm (7.28")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170, 185mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002104
Price:
100.00Buy Now
IMAGES:
GReddy Tip RS SUS Dia 115 x L 185

Replacement RS SUS 304 Tip(s) 115mm Dia. x L185mm - NEW

11001158
Car Make: GReddy Tip
Car Model: RS SUS
Car Year: Dia 115 x L 185
Notes:

1x GReddy Revolution RS Tip Dia115 x L185 for most 3" Revolution (160mm dia.) muffler systems
- Single-wall 304 Stainless-steel with etched GReddy Logo

*(also compatiable with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 185mm (7.28")
Material: 304 Stainless-steel
Mounting pattern: Revolution RS Tri-mounting

115mm dia. x L185mm - GReddy logo - p/n 11001170
115mm dia. x L185mm - RS Race logo - p/n 1100158


Replacement (& optional tip lengths) GReddy Revolution RS SUS304 Tip. Exclusively for GReddy Revolution RS exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths aviable 120, 150, 170, 185mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001158
Price:
$45.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 105 x L 120

Optional GReddy RS Titanium Tip(s) 105mm Dia. x L120mm 

11002111
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 105 x L 120
Notes:

1x GReddy Ti Revolution RS Tip Dia. 105 x L120 for most 2.5" Revolution (140mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (140mm dia.) GPP RS-RACE & GPP RS-Ti round and oval mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 120mm (4.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths available 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002111
Price:
$95.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 105 x L 150

Optional GReddy RS Titanium Tip(s) 105mm Dia. x L150mm 

11002112
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 105 x L 150
Notes:

1x GReddy Ti Revolution RS Tip Dia. 105 x L150 for most 2.5" Revolution (140mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (140mm dia.) GPP RS-RACE & GPP RS-Ti round and oval mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 105mm (4.1")
Length: 150mm (5.9")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 2.5" piping diameter and 140mm overall muffler diameter. 
(105mm Tip Lengths available 120, 150mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002112
Price:
$95.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 115 x L 120

Optional GReddy RS Titanium Tip(s) 115mm Dia. x L120mm

11002101
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 115 x L 120
Notes:

1x GReddy Ti Revolution RS Tip Dia. 115 x L120 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 120mm (4.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002101
Price:
$95.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 115 x L 150

Optional GReddy RS Titanium Tip(s) 115mm Dia. x L150mm 

11002102
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 115 x L 150
Notes:

 1x GReddy Ti Revolution RS Tip Dia.115 x L150 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 150mm (5.9")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002102
Price:
$95.00Buy Now
IMAGES:
GReddy Tip RS Titainium Dia 115 x L 170

Optional GReddy RS Titanium Tip(s) 115mm Dia. x L170mm

11002103
Car Make: GReddy Tip
Car Model: RS Titainium
Car Year: Dia 115 x L 170
Notes:

1x GReddy Ti Revolution RS Tip Dia. 115 x L170 for most 3" Revolution (160mm dia.) muffler systems

- Single-wall Burnt Titanium finish with etched GReddy Logo

*(also compatible with most (160mm dia.) GPP RS-RACE & GPP RS-Ti mufflers)


- Call to check compatibility with your application. (949) 588-8300

Dia.: 115mm (4.5")
Length: 170mm (6.7")
Material: Titanium
Mounting pattern: Revolution RS Tri-mounting

Optional tip lengths) GReddy Revolution RS Ti Tip. Exclusively for GReddy Revolution RS and GPP RS Ti and GPP RS-RACE exhausts with 3" piping diameter and 160mm overall muffler diameter. 
(115mm Tip Lengths available 120, 150, 170mm)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11002103
Price:
$95.00Buy Now
IMAGES:
Honda Civic Si 2006-09

4dr. adapter

11050104
Car Make: Honda
Car Model: Civic Si
Car Year: 2006-09
Notes:

converts coupe se exhaust to work on the sedan

4dr. adapter only. use with p/n 101528208

Part #: 11050104
Price: 85.00
IMAGES:
Honda Civic Type R 2017-21

GReddy Supreme SP Exhaust 

10158214
Car Make: Honda
Car Model: Civic Type R
Car Year: 2017-21
Notes:

The GReddy Honda Civic Type R exhaust keeps with the SP tradition of a street performance exhaust. Careful attention to both sound and performance was considered in the design of this system. The free flowing straight-though exhaust on the CTR’s turbocharged K20C1 engine netted just 88dba on our standardized revving sound test with an amazing 16whp increase on our chassis dyno. Large diameter, stainless-steel, 3” mandrel-bent piping is tucked up in the FK8 Civic Type R chassis to a larger specially shaped SP oval muffler, to maximize flow and control the sound quality. Exhaust flow exits through dual 2.5” ports on the muffler canister to carefully positioned, high polished exhaust pipes and dual-wall Tips. The Civic Type R’s rear diffuser exhaust opening is elegantly completed with a special GReddy Supreme SP badge, between the dual 4.5” SP tips. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP

 

* AVAILABLE OPTION ITEMS: compatiable with Supreme SP 
   Full 3" Forward Mid-pipe Replacement p/n 10558601
   3" Front Over-pipe Option p/n 10558600

 

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Cat-back single oval muffler
               with dual tips & spl. Supreme SP badge

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   no

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  88 dB(a) @3400rpm (limited)

HP:  +16  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158214
Price: 780.00
IMAGES:
Honda Civic Si Sedan 2012-15

4dr. adapter

11050108
Car Make: Honda
Car Model: Civic Si Sedan
Car Year: 2012-15
Notes:

FG4  (K24) 2.4L
*Sedan

4 door adapter

Use this p/n 11050103 extention adapter allows the installation of GReddy 2012- Honda Civic Si (Coupe) exhaust on the 2012- Honda Civic Si (Sedan).
 

   *GReddy Exhaust System sold seperately: Evo3 | SPelite

*Also see our GReddy Air Intake System for the Civic Si

Part #: 11050108
Price:
150.00Buy Now
IMAGES:
Honda Civic (HB) 1992-95

GReddy Supreme SP Exhaust

10158205
Car Make: Honda
Car Model: Civic (HB)
Car Year: 1992-95
Notes:

The SP exhaust for iconic (EG) Honda Civic Si hatchback is back. This time the Supreme SP is tuned specifically for modified EG Civics. Designed to enhance performance for either bolt-on turbo kits or larger displacement engine swaps, this version features large diameter 76mm (3”) piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

 

SOUND CLIP

Chassis:  EG
Engine:  D16 (B series / K series)
Type:  XL diameter cat-back

Number of pieces:  3 pcs.
Piping:   76 mm (3.0 ")
Tip:   115 mm (4.5 ")
Gasket(s):    3.0 " oval (qty: 2 included) replacement
Resonator:   yes

Note: short length of 2.5" piping to bolt-on to OE style catalytic converter flanges.

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 92* dB(a) - * with GReddy Turbo Kit.

HP:  +TBA  hp -* ideal for turbocharged applications
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158205
Price:
750.00Buy Now
IMAGES:
Honda Civic (Cpe) 1992-00

GReddy Supreme SP Exhaust- TBA

10158206
Car Make: Honda
Car Model: Civic (Cpe)
Car Year: 1992-00
Notes:

The Legacy of the SP lives on with our best street performance system yet, the Supreme SP!

   more info coming soon...

Models: EX, Si

Chassis:  EJ / EM
Engine:  D16 / B16
Type:   TBA system

Number of pieces:  TBA
Piping:   TBA mm (TBA ")
Tip:   TBA mm (TBA ")
Gasket(s):    TBA " oval (qty: X included) replacement
Resonator:   TBA

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158206
Price: TBA
IMAGES:
Honda Civic (HB) 1996-00

GReddy Supreme SP Exhaust

10158207
Car Make: Honda
Car Model: Civic (HB)
Car Year: 1996-00
Notes:

This special Supreme SP exhaust for EK-chassis Honda Civic hatchback is part of the new modern GReddy take on classic tuned Honda(s). Designed specifically to enhance performance for larger displacement or turbocharged engine swaps, this version features large diameter 76mm (3”) piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory style (K20) catalytic converter (downpipe) flanges. The four piece design features a large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the RPM range. Careful attention to routing allows for simple install, OEM like fitment and that iconic GReddy styling. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP TBA

Chassis:  EK
Engine:  K series swap
Type:   XL diameter cat-back

Number of pieces:  4
Piping:   76 mm (3.0")
Tip:   102 mm (4.0")
Gasket(s):    3.0" oval (qty: 3 included) replacement
Resonator:   yes

Notes: designed to bolt-on to K-swapped 3-bolt (76mm bolt pattern spread) catalytic conveter flange.

Weight:  31.7 lbs
Sound Comparison (SAE J1169) Test: 100 dB(a) @5500 RPM

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158207
Price:
780.00Buy Now
IMAGES:
Honda Civic Si 2006-11

GReddy Supreme SP Exhaust

10158208
Car Make: Honda
Car Model: Civic Si
Car Year: 2006-11
Notes:

The Supreme SP for ever-popular (FG) Civic Si coupe embraces the classic GReddy Civic styling that has made the SP line so popular over the years. Stand out features of this latest version include: larger diameter 63.5mm (2.5”) piping, updated resonator, improved muffler section, and our new limited lifetime warranty. Like all GReddy exhausts, it’s the ideal combination of fitment, styling, performance and deep exhaust note, that sets it apart from the competitors. It is also designed to be compatible with both Si models; coupe and sedan (using the optional 11050104 adapter.) Each GReddy Supreme SP system is a fully hand-welded 304 Stainless-steel exhaust.

 

SOUND CLIP

Models: Si Coupe, Si Sedan-use with 11050104*

Chassis:  FG2
Engine:  K20
Type:   Cat-back exhaust

Number of pieces:  3pcs
Piping:   63.5 mm (2.5 ")
Tip:   102 mm (4.0 ")
Gasket(s):    2.5 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  27.5 lbs   (Stock weight  27.3 lbs)
Sound Comparison (SAE J1169) Test:  90 dB(a) 

HP:  +5  hp
TRQ:  +3  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158208
Price:
790.00Buy Now
IMAGES:
Honda Civic Si 2012-15

GReddy Supreme SP Exhaust

10158209
Car Make: Honda
Car Model: Civic Si
Car Year: 2012-15
Notes:

The Supreme SP for the 9th generation, (FB) Civic Si features our signature GReddy layout, styling and sound, with new revised piping diameter. It is designed to be compatible with both Si models; coupe and sedan (using the optional 11050108 adapter.) The straight-through resonator and specially-made oval muffler with off-set extended tip allows the system to follow the Civics’ bodies lines and help reduce drone and high pitch frequencies. It also provides good power gains throughout the usable power band. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Models: Si Coupe (use with 11050108 4dr adapter for sedans)
Chassis:  FG4 (FB6 4dr. with adapter)
Engine:  K24
Type:   cat-back exhaust system

Number of pieces:  3pcs.
Piping:   63.5 mm (2.5")
Tip:   105 mm (4.0 ")
Gasket(s):    2.5 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  28.0 lbs   (Stock weight  30.8 lbs)
Sound Comparison (SAE J1169) Test: 94.0 dB(a)

[DYNO]

HP:  +11  hp
TRQ:  +2  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158209
Price:
800.00Buy Now
IMAGES:
Honda S2000 2000-09

GReddy Revolution RS Exhaust

10158100
Car Make: Honda
Car Model: S2000
Car Year: 2000-09
Notes:

The Revolution RS for the Honda S2000 features full 2.5” diameter piping for superior performance. The purposeful single-sided cat-back layout with minimal bends produces an effective but light-weight system. Careful attention to hanger locations makes it compatible with both AP1 and AP2 chassis. The extra large GReddy resonator controls unwanted drone, that is typically associated with larger diameter S2000 systems. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  AP1 / AP2

Engine:  F20 / F22
Type:  Cat-back system

Number of pieces: 2pc
Piping:    63.5mm ( 2.5 in.)
Tip:   115mm (4.5")  x  L 150mm (5.9")
Gasket(s):    2.5" oval (qty: 1 included) replacement
Resonator:   Yes
Note:  160xL350mm Revolution RS muffler canister 

Weight:  TBA lbs   (Stock weight  52 lbs)
Sound level:  97dB(a)

HP:  +5.8hp
TRQ:  +4.9 ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158100
Price:
725.00Buy Now
IMAGES:
Honda S2000 2000-09

GReddy Supreme SP Exhaust

10158213
Car Make: Honda
Car Model: S2000
Car Year: 2000-09
Notes:

The Supreme SP for the Honda S2000 provides everything you want in a street performance system; superb looks, refined sound with performance gains. The full stainless-steel, cat-back, Supreme SP, with dual oval SP mufflers and smaller 105mm (4.1") double wall tips is designed to work with both the AP1 and AP2 S2000 chassis. Extensive internal muffler and resonator tuning, provide excellent sound suppression for a comfortable, but sporty, ride quality. The large 2.5” (63.5mm) straight through design improves engine exhaust efficiency for performance gains.  And like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  AP1 / AP2
Engine:  F20 / F22
Type:   Dual Muffler Cat-Back

Engine: F20 / F22
Type: Cat-back system

Number of pieces: 3pc
Piping: 63.5mm ( 2.5 in.) - 2x 63.5mm ( 2.5 in.)
Tip: 105mm (4.1")
Gasket(s): 2.5" oval (qty: 2 included) replacement
Resonator: Yes

Weight: 37.6 lbs (Stock weight 52 lbs)
Sound Comparison (SAE J1169) Test*:  94 /94.5  dB(a)

HP*: 6whp
TRQ*: 2ft-lbs

*test results may vary


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158213
Price:
1000.00Buy Now
IMAGES:
Honda S2000 2000-09

GPP RS Race Exhaust

10158401
Car Make: Honda
Car Model: S2000
Car Year: 2000-09
Notes:

GReddy Performance Products RS-Race Exhaust

GPP engineers utilize proven, compact, high-flow straight-through, Racing Sport muffler canister and extra large 304 stainless-steel mandrel-bent tubing; 80mm (3.14”) diameters for turbocharged vehicles and 76mm (3.0”) normally-aspirated race applications. The RS-RACE systems offer our most aggressive sound quality.  The RS-RACE even features our proven removable Tri-bolt tip mounting system to allow for customizing the systems with a variety of optional Titanium or Stainless-steel tips and unique large diameter RS silencers to further control sound.
 

Chassis: AP1 / AP2
Engine: F20 / F22
Type: Cat-back exhaust

Number of pieces: 2pcs
Piping: 76mm (3.0")
Tip: 115mm X L120mm
Gasket(s): 3.0" oval (qty: 1 included) replacement
Note: 160xL350 Revolution RS muffler canister.

Weight:  TBA lbs   (Stock weight  52 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158401
Price:
600.00Buy Now
IMAGES:
Honda Civic Si (Sedan) 2017-on

GReddy Supreme SP Exhaust 

10158217
Car Make: Honda
Car Model: Civic Si (Sedan)
Car Year: 2017-on
Notes:

2017-on  Honda Civic Si 4door Sedan (only)

Designed specifically for the 10th generation (FC1) Sedan version of the Honda Civic Si, is our dual muffler Supreme SP cat-back exhaust. With similar features as our coupe version, the longer sedan version features high-flow with refined exhaust note. Under wide-open-throttle, spirited driving, the system offers the classic GReddy deep exhaust growl. To enhance the performance of the turbocharged 1.5L engine, this 3piece,  cat-back exhaust connects to the factory piping (our system bolts to the factory exhaust system at the flange behind the engine/transmission) and expands to large 3” (76mm) forward-midpipe and mid-pipe that split to two polished, straight-through SP oval mufflers and dual center-exit dual-wall GReddy tips. The sedan version has a slight more aggressive tip angle and muffler combination is a better compliment to the Si sedan’s sporty, but wide rear bumper tip opening. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP  

Chassis:  FC1 4door Sedan
Engine:  L15  Turbo
Type:   3" Cat-back with dual oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   2x 115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer. This item is currently not available through our online store.

Part #: 10158217
Price: 900.00
IMAGES:
Honda Civic Type R 2017-21

GReddy Supreme SP Exhaust (HG)

10158215
Car Make: Honda
Car Model: Civic Type R
Car Year: 2017-21
Notes:

GReddy Supreme SP – HG (High Grade) is our premium stainless-steel cat-back exhaust for the (FK8) Civic Type R. Besides the looks of the HG’s fully polished stainless-steel mandrel-bent piping and unique, functional GReddy three tip configuration; extensive research and development has lead to this supreme exhaust system. Careful attention was placed on the Civic Type-R’s exhaust sound characteristics, when incorporating our purposeful, high-flow, tri-routing layout. The large 76mm (3”) diameter piping flows smoothly through a large mid-pipe resonator and then branches out to the high-flow 3” center SP muffler and the two side-mounted sound chambers, before exiting the GReddy triple exhaust tips. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP

 

* AVAILABLE OPTION ITEMS: compatiable with Supreme SP (HG)
   Full 3" Forward Mid-pipe Replacement p/n 10558601
   3" Front Over-pipe Option p/n 10558600


Chassis: FK8
Engine: K20C1 Turbo
Type:  Premium 3" Triple Tip *HG" - Cat-back exhausts

Number of pieces: TBA
Piping: 76mm (3") - 3x (1x 76mm & 2x 63.5mm)
Tips: Triple = 105mm (4.1") - 115mm (4.5") - 105mm (4.1")
Gasket(s): 3 " oval (qty: 2 included) replacement
Resonator: yes (1 center / 2 rear side)

Weight: TBA lbs (Stock weight TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a) @3400rpm (limited)

HP: TBA hp
TRQ: TBA ft-lbs

      *HG - High Grade - fully high polished

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer. This item is currently not available through our online store.

Part #: 10158215
Price: 1795.00
IMAGES:
Honda Civic Sport HB 2017-21

GReddy Supreme SP Exhaust 

10158212
Car Make: Honda
Car Model: Civic Sport HB
Car Year: 2017-21
Notes:

The Supreme SP cat-back exhaust, for the turbocharged 10th generation Honda Civic Sport hatchback, improves the performance, sound quality and styling, by applying our signature SP (Street Performance) ideals into the design. The system not only incorporates large 76mm (3”) piping, but smoothes out and simplifies the heavier, factory, two muffler layout with a free flowing, compact single entry, dual outlet, oval SP muffler. This allows the turbocharged L15 engine to be more efficient for added performance, without having drone or being loud. The Supreme SP sound level was carefully tuned not to require any additional resonators; this also helps lighten up the system. The polished stainless-steel center-exit exhaust is finished off with stylish dual, double-wall, slant cut GReddy tips, to enhance the Civic’s sporty rear diffuser. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty

SOUND CLIP

Chassis:  FK7
Engine:  L15  Turbo
Type:   Cat-back single oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   105 mm (4.1 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   no

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10158212
Price: 690.00
IMAGES:
Honda Civic Si (Coupe) 2017-20

GReddy Supreme SP Exhaust 

10158216
Car Make: Honda
Car Model: Civic Si (Coupe)
Car Year: 2017-20
Notes:

2017-on  Honda Civic Si Coupe (only)

The unique dual muffler Supreme SP for the 10th generation Honda (FC3) Civic Si coupe features high-flow with a refined exhaust note. Under wide-open-throttle, spirited driving, the system offers the classic GReddy deep exhaust growl. To enhance the performance of the turbocharged 1.5L engine, this 3piece, cat-back exhaust connects to the factory piping (our system bolts to the factory exhaust system at the flange behind the engine/transmission) and expands to large 3” (76mm) forward-midpipe and mid-pipe that split to two polished, straight-through SP oval mufflers and dual center-exit dual-wall GReddy tips. This tip and muffler combination is a great compliment to the Si’s sporty, but wide rear bumper tip opening. (We also offer a similar, application-specific system for the (FC1) Civic Si sedan.)  Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP  

Chassis:  FC3 coupe
Engine:  L15  Turbo
Type:   3" Cat-back with dual oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   2x 115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

Part #: 10158216
Price: 900.00
IMAGES:
Honda Civic Type R 2017-21

Optional Full 3" Forward Midpipe for Civic Type R Supreme SP & HG exhaust

10558601
Car Make: Honda
Car Model: Civic Type R
Car Year: 2017-21
Notes:

To further improve the the flow and performance of your GReddy (FK8) cat-back exhaust for the Civic Type R, we have released this optional full 3" (non-tapered) forward midpipe, that will replace the orginal Supreme SP (& HG) forward midpipe. The slight taper in the standard Supreme SP forward midpipe (is designed to mate upto the factory overpipe flange and) more than adequate for use with the Civic Type R factory catalytic conveter and factory front overpipe, but when upgrading these units, you may aslo want to maximize the flow with a full 3" (76mm) stainless steel forward midpipe upgrade. Specially designed flanges and gaskets allow for a perfect match to our emissions friendly (cat-back) 3' Front Overpipe (p/n 10558600 sold separately).  

For more info. see (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement forward midpipe replacment for Civic Type R Supreme SP p/n 10158214 (& HG p/n 10158215)

Notes: This upgrade should be compatiable with many other popular aftermarket 3" downpipe and overpipe combos.
             (also compaitable with the GPP 3' Front Overpipe p/n 10558600)

Number of pieces: 1
Piping:   76 mm (3 ")
Gasket(s):    3 " spl. 3-bolt (qty: 1 included) replacement + 3 bolts and nuts
 

Part #: 10558601
Price:
230.00Buy Now
IMAGES:
Honda Civic Type R 2017-21

Full 3" Civic Type R Front Overpipe & Forward Midpipe Set 

10558602
Car Make: Honda
Car Model: Civic Type R
Car Year: 2017-21
Notes:

Maximize the flow of our your 3" (FK8) Civic Type R cat-back exhaust with the simple installation of our optional 3" (76mm) Front Overpipe and full 3" upgrade for the Supreme SP (& HG) Forward Midpipe.   These two upgrades will allow you to take full advanate of flow of your 3" Supreme SP exhaust.  It includes p/n 10558600 - FK8 Front Over Pipe and p/n 10558601 - FK8 Forward Midpipe upgrade for a GReddy Supreme SP ( & HG) exhaust for the FK8 Honda Civic Type R. 

For more Info. see (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement front overpipe and full 3" upgraded forward midpipe for Civic Type R 

Notes: Installs after factory downpipe/catalytic converter (or aftermarket equivalent) and replaces the first section of piping from the Supreme SP & HG exhaust.  

Number of pieces: 2
Piping:   76 mm (3 ")
Gasket(s):    3" 3-bolt, spl. OE-style 3-bolt (qty: 1 each included) replacement + 3 nuts and bolts
Flex Joint:   yes

Part #: 10558602
Price:
535.00Buy Now
IMAGES:
Honda Civic Type R 2017-21

Full 3" Civic Type R Front Overpipe

10558600
Car Make: Honda
Car Model: Civic Type R
Car Year: 2017-21
Notes:

Maximize the flow of our your 3" (FK8) Civic Type R cat-back exhaust with the simple installation of our optional 3" (76mm) Front Overpipe with flex pipe. This full 3" (76mm), emissions-friendly, cat-back, stainless-steel, front over-pipe for (FK8) Civic Type R, installs with common sized, high quality laser cut 3-bolt flanges, in between the factory down-pipe (or aftermarket equivalent) and GReddy Supreme SP ( & HG) exhaust with Full 3" Forward Mid-pipe p/n 10558601 (or many popular aftermarket 3" exhaust systems) 

For more info see: (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement front overpipe for Civic Type R 

Notes: Installs inbetween factory downpipe/catalytic converter (or aftermarket equivalent) and popular 3" exhausts with common 3" 3-bolt flange.     Supreme SP & HG must also use our replacement Full 3" Forward Midpipe upgrade (p/n 10558601)

Number of pieces: 1
Piping:   76 mm (3 ")
Gasket(s):    3" 3-bolt and spl. OE-style 3-bolt (qty: 1 each included) replacement + 3 nuts and bolts
Flex Joint:   yes

Part #: 10558600
Price:
355.00Buy Now
IMAGES:
Honda Civic Si (Coupe) 2017-on

Greddy Performance Products DD-R  Exhaust 

10158600
Car Make: Honda
Car Model: Civic Si (Coupe)
Car Year: 2017-on
Notes:

2017-on  Honda Civic Si Coupe (only)

The DD-R compact dual muffler exhaust for the Honda (FC3) Civic Si coupe is designed for owners who desire a high quality, free-flowing exhaust with aggressive looks and sound to match. This full stainless-steel cat-back system begins after the front over-pipe with a 76mm (3”) front-pipe with tucked resonator to a full 3” mid-pipe all the way back to the rear section. The 3” piping then splits to two large 63.5mm (2.5”) inlets for the polished, 101.5mm (4”) DD-R mufflers via our precision Y-pipe. The DD-R is finished off with removable dual GPP engraved stainless steel slash-cut tips. The DD-R’s removable tips allow for customization with various optional tips and muffler silencers (sold separately.)

SOUND CLIP  

Chassis:  FC3 coupe
Engine:  L15  Turbo
Type:   3" Cat-back with dual compact muffer tips

Number of pieces: 3
Piping:   (slight taper at 1st flange allow it to connect to the factory overpipe)
               76 mm (3") - 2x 63.5mm (2.5") 
Tips:   2x 101mm (4 ") with GPP logo
Gasket(s):    3" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

Part #: 10158600
Price: 990.00
IMAGES:
Honda Civic Si (Sedan) 2017-on

Greddy Performance Products DD-R  Exhaust 

10158601
Car Make: Honda
Car Model: Civic Si (Sedan)
Car Year: 2017-on
Notes:

2017-on  Honda Civic Si Sedan (only)

The DD-R compact dual muffler exhaust for the Honda (FC1) Civic Si sedan is designed for owners who desire a high quality, free-flowing exhaust with aggressive looks and sound to match. This full stainless-steel cat-back system is similar to the coupe version and begins after the front over-pipe with a 76mm (3”) front-pipe with tucked resonator to a full 3” mid-pipe all the way back to the rear section. The 3” piping then splits to two large 63.5mm (2.5”) inlets for the polished, 101.5mm (4”) DD-R mufflers via our precision Y-pipe. The DD-R is finished off with removable dual GPP engraved stainless steel slash-cut tips. The DD-R’s removable tips allow for customization with various optional tips and muffler silencers (sold separately.)

SOUND CLIP  

Chassis:  FC1 4door sedan
Engine:  L15  Turbo
Type:   3" Cat-back with dual compact muffer tips

Number of pieces: 3
Piping:  (slight taper at 1st flange allow it to connect to the factory overpipe)
              76 mm (3") - 2x 63.5mm (2.5")
Tips:   2x 101mm (4 ")  with GPP logo
Gasket(s):    3" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

Part #: 10158601
Price: 990.00
IMAGES:
Honda Civic Type-R 2017-on

Greddy Performance Products DD-R  Exhaust 

10158603
Car Make: Honda
Car Model: Civic Type-R
Car Year: 2017-on
Notes:

2017-on  Honda Civic Type-R (can also fit Civic Sport Hatchback)

With our distinctive style and design, the Greddy Performance Products DD-R is our modern take on the highly-sought after GReddy DD “Dynamic Dual” exhaust of the past. Our iconic DD exhausts have always been recognized for its aggressive dual exit look and racey sound, but with this new DD-R, we also incorporated updated and improved full 304 stainless-steel construction. The GPP DD-R has been adapted to modern tuner cars to not only enhances the looks and sound, but to improve performance with its carefully designed dual high-flow straight-through muffler layouts. Another new feature on the DD-R is the tunability. With the new twin removable tips, new options for tips finishers and silencers, now allow the owner to fine tune the looks, sound and flow of their DD-R. GPP’s newest exhaust style is almost here… stay tuned for more updates and applications coming soon!

SOUND CLIP  

Chassis:  FK8 ( & FK7 ) 5door hatchback
Engine:  K20 (L15)  Turbo
Type:   3" Cat-back with dual compact muffer tips

Number of pieces: 3
Piping:   (slight taper at 1st flange allow it to connect to the factory overpipe)
                76 mm (3") - 2x 63.5mm (2.5")
Tips:   2x 101mm (4")  with GPP logo
Gasket(s):    3" oval (qty: 2 included) replacement
Resonator:   TBA

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

Part #: 10158603
Price: 1050.00
IMAGES:
Honda Civic Sport HB 2017-on

Greddy Performance Products DD-R  Exhaust

10158602
Car Make: Honda
Car Model: Civic Sport HB
Car Year: 2017-on
Notes:

2017-on  Honda Civic Sport Hatchback (can also fit Civic Type-R, but may be loud, resonated p/n 10158603 coming for the Type R)

Aggressive styling with sound to match comes with the DD-R exhaust for the Honda (FK7) Civic Sport hatchback. This high-quality race-inspired system features our unique customizable dual DD-R mufflers. The removable tips allow for different look and sound with optional tips and tip silencers. This specific DD-R enhances the flow and sound of the Sport’s L15 turbocharged engine without the need for a mid-pipe resonator. The high-quality stainless-steel construction is designed to bolt up to the factory piping and runs a 3” (76mm) piping up to the rear where it splits to dual 2.5” (63.5mm) piping via our DD-R precision Y-pipe and finally the twin signature DD-R mufflers.

SOUND CLIP  

Chassis:  FK7 (& FK8 ) 5door hatchback
Engine:  L15 (K20)  Turbo
Type:   3" Cat-back with dual compact muffer tips

Number of pieces: 3
Piping:  (slight taper at 1st flange allow it to connect to the factory overpipe)
              76 mm (3") - 2x 63.5mm (2.5")
Tips:   2x 101mm (4")  with GPP logo
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   no

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

 

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

Part #: 10158602
Price: 870.00
IMAGES:
Honda Civic Sport HB 2018-on

Greddy Performance Products DD-R Exhaust - ShopGReddy.com Exclusive

10158602R
Car Make: Honda
Car Model: Civic Sport HB
Car Year: 2018-on
Notes:

ShopGReddy.com Exclusive for
    FK7 Civic Sport HB that already have a FK7 GReddy Supreme SP Cat-back Exhaust - 
 (also available with optional Titanium Tips)

 

Transform the look and sound of your current FK7 Supreme SP cat-back exhaust with our Optional DD-R Muffler Section (p/n 10158602R-SUS). Just unbolt the rear-most muffler section of your cat-back Civic Sport Supreme SP and install this more aggressive dual DD-R muffler section. Change back and forth with these easily, using the interchangeable rear mufflers. 

 

SOUND CLIP  

Chassis:  FK7 (& FK8 ) 5door hatchback with a GReddy Supreme SP exhaust
Engine:  L15 (K20)  Turbo
Type:   3" rear section only -back with dual compact muffer tips

Number of pieces: 1
Piping:  76 mm (3") - 2x 63.5mm (2.5")
Tips:   2x 101mm (4")  with GPP logo
Gasket(s):    3 " oval (qty: 1 included) replacement
Resonator:   no

  


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Click below to purchase from ShopGreddy.com

Part #: 10158602R
Price:
500.00Buy Now
Hyundai Veloster 2011-16

GReddy Supreme SP Exhaust

10178201
Car Make: Hyundai
Car Model: Veloster
Car Year: 2011-16
Notes:

The Supreme SP, for the Hyundai Veloster, features an excellent combination of performance and sound. Large 76mm (3.0”) mandrel-bent piping is carefully routed underneath the compact chassis to an extra large resonator and compact, rear mounted, oval SP muffler. To finish off the system, a smooth dual 63.5mm (2.5”) split leads to a functional, remote center exit with 102mm (4.0”) GReddy engraved tips. Power tests have shown increased performance throughout the power-band, with peak gains of 12whp and 6ft.lbs. Sound is well controlled for street use, with no passenger compartment drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  FS
Engine:  1.6L, Gamma T-GDI
Type:   Cat-back, remote center exit tips

Number of pieces:  3pcs.
Piping:   76mm (3.0") - 2x 63.5mm (2.5")
Tip(s):  2x 102mm (4.0")
Gasket(s):    3.0 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  20.5 lbs   (Stock weight  43.2 lbs)
Sound level:  87 dB(a) 4750rpm

HP:  +12  hp
TRQ:  +6  ft-lbs

(* fits Veloster R-Spec Turbo model)

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10178201
Price:
965.00Buy Now
IMAGES:
Infiniti Q50 2016-

GReddy EVOlution GT Exhaust

10128306
Car Make: Infiniti
Car Model: Q50
Car Year: 2016-
Notes:

The EVOlution GT for the Infiniti Q50 2wd. Sedan is the ideal combination of form and function. The dual cat-back exhaust utilizes an exhaust-pressure-equalizing dual 2.5” X-pipe crossover and large dual resonators to tune the exhaust sound of the twin turbo VR30DDTT engine. Large and aggressive 3” diameter dual EVO muffler canisters are angled purposely to minimize unnecessary bends and increase flow. Dual GReddy 4.5” single-wall slash tips finish off the system under the factory bumper cut-outs. Like all GReddy EVOlution GT systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty. 
 

Chassis:  V37
Engine:  VR30DDTT
Type:   Cat-back system

Number of pieces:  4
Piping:  
  2x 63.5 mm to 76mm"  (2.5" to 3.0" ) to 2x 63.5 mm to 76mm"
Tip:   110 mm (4.5 ")
Gasket(s):    3.0 " oval (qty: 3 included) replacement
Resonator:   dual 2.5" dia.  

Weight:  TBA lbs   (Stock weight  TBA lbs)

Sound level:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128306
Price:
1250.00Buy Now
IMAGES:
Infiniti G37 (Cpe) 2008-14

GReddy Revolution RS Exhaust

10128103
Car Make: Infiniti
Car Model: G37 (Cpe)
Car Year: 2008-14
Notes:

The Revolution RS for the Infiniti G37S has an aggressive growl while saving about half the weight over the stock system. The light-weight cat-back connects both engine banks through dual 2.5” (63.5mm) piping that merge smoothly into 3” (76mm) piping and a large resonator on the mid-pipe. The system exits an extra long, high-flow, RS muffler on the driver-side to manage sound output and avoid having to relocate the EVAP system. Dyno test have shown 11whp / 16ft-lbs gain on a normally-aspirated VQ37HR engine. Like all GReddy Revolution RS systems, it is a fully hand-welded 304 Stainless-Steel exhaust, that carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   CPV36
Engine:   VQ37HR
Type:   Cat-back exhaust with single sided muffler

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5") x L 150mm (5.9")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +11  hp
TRQ:  +16  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128103
Price:
925.00Buy Now
IMAGES:
Infiniti G37 2007-14

GReddy EVOlution GT Exhaust

10128304
Car Make: Infiniti
Car Model: G37
Car Year: 2007-14
Notes:

The EVOlution GT for the Infiniti G37 Coupe is not only ideal for turbocharged VQ37s but also makes great power for normally aspirated applications. The dual cat-back exhaust utilizes an exhaust-pressure-equalizing 2.5” X-pipe crossover and dual resonators for improved sound control. Large and aggressive 3” diameter dual EVO muffler canisters are angled to match the G37 looks, while making room for the factory EVAP canister. GReddy 4.5” single-wall slash tips finish off the system under the factory bumper cut-outs. Like all GReddy EVOlution GT systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis: V37
Engine: VQ37HR
Type: Dual muffler with X-pipe

Number of pieces: 4pcs
Piping: 2x 63.5 mm (2.5") to 2x 67mm (3.0")
Tip(s): 115 mm (3.0")
Gasket(s): 3.0" oval (qty: 3 included) replacement
Resonator: 2x

Notes: * no EVAP relocation required

Weight: TBA lbs 
Sound level: TBA dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10128304
Price:
1295.00Buy Now
IMAGES:
Lexus IS-F 2007-15
Supreme Ti Exhaust
10118500
Car Make: Lexus
Car Model: IS-F
Car Year: 2007-15
Notes:

[DISCONTINUED]

 
(USE20) 2UR-GSE
 
This is the ultimate Lexus IS-F exhaust. With full Titanium construction, the GReddy Supreme Ti Titanium Exhaust features our original Dual 60-70mm Titanium piping to Quad 60mm Titanium piping to the two Dual inlet Titanium oval mufflers. The kit is finished off with 4x burnt-spectrum Titanium tips, but the system can also be used with the factory bumper mounted IS-F stock tips, for a stealthy installation.
 

Make: Lexus
Model: IS-F
Engine: 2UR-GSE
Years: 2008-2013
 
Dual 60-70mm piping to Quad 60mm piping
4x 90mm bolt-on Titanium Tips
(or can be use without GReddy tips for OEM factory bumper mounted tips)
9pcs.
OEM Exhaust Weight 71lbs.
GReddy Racing Ti : 35lbs.
 
*For USA customers, this product is for competition (racing) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.  It is illegal in the USA, to drive a vehicle on public roads or highways with this product installed.
 



Part #: 10118500
Price: 4,495.00
IMAGES:
Lexus GS-F 2016-20

GReddy Supreme SP Exhaust

10118207
Car Make: Lexus
Car Model: GS-F
Car Year: 2016-20
Notes:

The Supreme SP for sporty Lexus GS-F offers our renowned exhaust note with graceful but aggressive styling. The straight-through, dual oval muffler system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the V8 exhaust note comes to life with a deep rich GReddy sound. The off-set slash-cut tips best match the GS-F’s aero styling. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

 

SOUND CLIP

Chassis:  L10
Engine: 2UR-GSE
Type:   dual muffler axle-back, with quad offset tips

Number of pieces:  2
Piping:   63.5 mm (2.5")
Tip(s):  4x  101 mm (4.0 ")
Gasket(s):     (re-)use OEM donut gaskets 
Resonator:   n/a

Weight:  17.2 lbs   (Stock weight  18.6lbs)

Sound Comparison (SAE J1169) Test: L 90 / R 90 dB(a)

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. *Test results may vary from car to car

Part #: 10118207
Price:
895.00Buy Now
IMAGES:
Lexus IS350 / IS250 2006-13

GReddy Supreme SP Exhaust 

10118202
Car Make: Lexus
Car Model: IS350 / IS250
Car Year: 2006-13
Notes:

The Supreme SP for the 2006-13 Lexus IS350 / IS250 features sophisticated exhaust note with an aesthetically functional design. The classic dual oval muffler axle-back system with large free flowing 63.5mm (2.5”) piping is comfortable to drive. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the straight-through design makes the exhaust comes to life with a deep rich GReddy sound. Tradition double wall GReddy tips on each SP best matches the styling of the vehicle. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

 

SOUND CLIP

 

Chassis: GSE20 - 2wd only
Engine:  2GR-FSE / 4GR-FSE
Type:   Dual muffler axle-back system

Number of pieces:  2pcs.
Piping:   63.5 mm (2.5")
Tip:   115mm (4.5")
Gasket(s):    2.5" oval (qty: 1 included) replacement
Resonator:   n/a

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  L:82 / R:82 dB(a)  @4800

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. *Test results may vary from car to car

Part #: 10118202
Price:
865.00Buy Now
IMAGES:
Lexus RC350 2015-16

GReddy Supreme SP Exhaust

10118204
Car Make: Lexus
Car Model: RC350
Car Year: 2015-16
Notes:

The Supreme SP for the 2015-on Lexus RC350 features up to a 10whp gain with a sophisticated exhaust note and an aesthetically artistic design. The classic dual oval muffler axle-back system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the straight-through design makes the exhaust comes to life with a deep rich GReddy sound. The unique quad tip configuration, using two different diameters, in an unique layout to best matches the styling of the vehicle. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

 

SOUND CLIP

Chassis:  GSC30 - 2wd only
Engine:  2GR-FSE
Type:   Dual Muffler, Quad-tip axle-back system

Number of pieces:  2pcs.
Piping:   63.5 mm (2.5")
Tip(s):  2x Outer 82.5mm (3.25") / 2x Inner 89mm (3.5")
Gasket(s):    re-use/replace OEM gaskets (qty: not included) 
Resonator:   n/a

Weight:  34.4 lbs  
Sound Comparison (SAE J1169) Test:  L86/R85 dB(a)

HP:  +10 hp
TRQ:  +1  ft-lbs

NOTE: for installation, please invert the rubber mounting hanger, on the inner side of the muffler cansisters, to be above the muffler hanger.


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. **Test results may vary from car to car

Part #: 10118204
Price:
895.00Buy Now
IMAGES:
Lexus IS300 2001-05

GReddy Revolution RS Exhaust

10118100
Car Make: Lexus
Car Model: IS300
Car Year: 2001-05
Notes:

The Revolution RS for the Lexus IS300 unleashes great power gains, with excellent sound properties, through a high performance cat-back layout. Sound levels at idle and cruising are surprisingly low, while at WOT (wide open throttle) the inline 6 cylinder sound of the IS300 is dramatically enhanced. The large 3” diameter also makes it ideal for additional upgrades and/or boost. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   SXE10
Engine:   2JZ-GE 
Type:   Cat-back system

notes:  * not compatible with wagon model

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:   115 mm (4.5") x L 120mm (4.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  30.6 lbs  
Sound level:  83 dB(a)

HP:  +10  hp
TRQ:  +15  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118100
Price:
725.00Buy Now
IMAGES:
Lexus IS300 2001-05

GReddy Supreme SP Exhaust

10118208
Car Make: Lexus
Car Model: IS300
Car Year: 2001-05
Notes:

The Supreme SP for the Lexus IS300 sedan is a great combination of classic looks, deep refined sound and high-flow performance. The straight-through oval SP muffler has good ground clearance and allows for good flow while enhancing the sound of the USA-spec. inline 6 cylinder 2JZ-GE N/A engine. The large 3” diameter also makes it a great choice for additional upgrades and/or boost. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   SXE10
Engine:   2JZ-GE 
Type:   Cat-back system

notes:  * not compatible with wagon model

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:   115 mm (4.5") x L 120mm (4.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  33 lbs  
Sound level:  82 dB(a)

HP: +9.5 hp
TRQ: +14 ft-lbs



*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118208
Price:
830.00Buy Now
IMAGES:
Mazda RX8 2003-08

GReddy Supreme SP Exhaust

10148200
Car Make: Mazda
Car Model: RX8
Car Year: 2003-08
Notes:

The Supreme SP for the Mazda RX8 features dual horizontally-mounted straight through mufflers connected by a smooth center “Y.” The larger 2.5” piping routing provides smooth flow. Dual wall Supreme SP tips fit nicely through the factory rear bumper exits. It’s a great sounding exhaust for a stylish 2004-08 RX8 cat-back. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  SE3P
Engine:   13B-MSP
Type:   cat-back system
   (horizontaly mounted dual mufflers with dual tips)

Number of pieces:  2
Piping:   63.5mm (2.5")
Tip:   102mm (4.0")
Gasket(s):    2.5 " oval (qty: 1 included) replacement
Resonator:   n/a

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10148200
Price:
985.00Buy Now
IMAGES:
Mazda Miata 2016-17

GReddy Supreme SP Exhaust

10148207
Car Make: Mazda
Car Model: Miata
Car Year: 2016-17
Notes:

The Supreme SP for the 4th generation ND Mazda Miata was designed and engineered specifically to suit the USA spec 2.0l Skyactiv-G engine combination. Unique to this application is the availability of either the pre-resonated axle-back muffler system, for maximum sound control with enhanced flow. Or there is also a full system, that includes a dual resonated mid-pipe for even more performance and a sportier sound. The full system showed power increase throughout the RPM band.  Both options use the same unique rear section with dual 82mm GReddy exhaust tips. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

Chassis:  ND
Engine:  2.0l Skyactiv-G 
Type:   Rear Section only

Number of pieces:  1pc
Piping:   63.5 mm (2.5")
Tip(s):   2x. 82mm (3.25")
Gasket(s):    reuse OEM 
Resonator:   1x

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 80 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10148207
Price:
725.00Buy Now
IMAGES:
Mazda RX-7 1993-96

GPP RS Race Exhaust

10148402
Car Make: Mazda
Car Model: RX-7
Car Year: 1993-96
Notes:

GReddy Performance Products RS-Race Exhaust

For that period-correct look and sound, the GPP RS-Race for the 1993-96 (FD3S) Mazda RX-7 is here. Styled after the legendary Power Extreme II RX-7 exhaust of the late 90’s-early 00’s, this new and improved version follows the same high-flow straight-through layout with large 80mm (3.14”) diameter mandrel-bent stainless-steel piping, but now it also incorporates superior construction, materials and precision hand-welding. The new RS-Race Tri-bolt tip feature allows for even more customization, with the installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium. We even offer optional Titanium turn-down tips, perfect for that hot rotary exhaust gases of stock and modified 13B-REW rotary engines. Relive the gold age of “Import Tuning” with the RX-7 RS-Race Exhaust!
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170
  * Optional Titanium Turndown Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   FD3S
Engine:   13B-REW
Type:   Cat-back exhaust

Number of pieces:  1pc
Piping:   80mm (3.14")
Tip:   115 mm
Gasket(s):    80mm oval (qty: 1 included) replacement
 

Weight:  16.3 lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10148402
Price:
600.00Buy Now
IMAGES:
Mazda RX-7 FD3S

Trust PE-TR Exhaust - NEW

10147310
Car Make: Mazda
Car Model: RX-7
Car Year: FD3S
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for 
1993-02 Mazda RX-7 

Chassis: FD3S
Engine: 13B-REW
Type: Cat-back system

 


Number of pieces: 1pc
Piping: 80 mm (3.14")
Tip(s): 115mm (4.5") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 1 included)
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo

Part #: 10147310
Price:
950.00Buy Now
Mitsubishi Lancer GTS 2008-11

GReddy Supreme SP Exhaust

10138200
Car Make: Mitsubishi
Car Model: Lancer GTS
Car Year: 2008-11
Notes:

The Supreme SP for the Mitsubishi Lancer GTS features a special compact oval SP muffler, with a stylish angled layout. The position of the muffler allows for a more direct exhaust flow, while the tuned internal straight-through design controls sound levels. The compact design also saves over 12lbs. off the car. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  JA3AU
Engine:  4B11
Type:   axle-back

Number of pieces:  1pc
Piping:   63.5mm (2.5 ")
Tip:   102mm (4.0")
Gasket(s):   OEM  (qty: 0 included) 
Resonator:   n/a

Weight:  10.6 lbs   (Stock weight  22.75 lbs)
Sound Comparison (SAE J1169) Test:  89 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138200
Price:
500.00Buy Now
IMAGES:
Mitsubishi Lancer GT 2012-14

GReddy Supreme SP Exhaust

10138201
Car Make: Mitsubishi
Car Model: Lancer GT
Car Year: 2012-14
Notes:

The Supreme SP for the Mitsubishi Lancer GT features an extra compact SP style muffler with large 2.5” diameter piping. The angled layout minimizes bends and adds to the great looks. The factory compatible flange makes installation with the OEM gasket a breeze. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  JA32U
Engine
:  4B12
Type:   axle-back system

Number of pieces:  1pc
Piping:   63.5mm (2.5")
Tip:   102mm (4.0")
Gasket(s):   OEM (qty: 0 included) replacement
Resonator:   n/a

Weight:  10.1 lbs   (Stock weight  15.5 lbs)
Sound Comparison (SAE J1169) Test: 95 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138201
Price:
500.00Buy Now
IMAGES:
Mitsubishi Lancer GTS 2008-11

GReddy Revolution RS Exhaust

10138100
Car Make: Mitsubishi
Car Model: Lancer GTS
Car Year: 2008-11
Notes:

The Revolution RS is our most aggressive system we offer for the Mitsubishi Lancer GTS. The compact straight-through muffler offers a more sporty sound and look to the car. The system also has much larger 2.5” piping, but still saves weight over the factory OEM system. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.


SOUND CLIP

Chassis:   JA3AU

Engine:   4B11
Type:   axle-back system

Number of pieces:  1pc
Piping:   63.5mm (2.5")
Tip:    105mm (4.1") x L 120mm (4.7") or non-removable (early model)
Gasket(s):    OEM (qty: 0 included) 
Resonator:   n/a

Weight:  9.5 lbs   (Stock weight  22.72 lbs)
Sound level:  93 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138100
Price:
475.00Buy Now
IMAGES:
Mitsubishi Lancer GT 2012-14

GReddy Revolution RS Exhaust

10138101
Car Make: Mitsubishi
Car Model: Lancer GT
Car Year: 2012-14
Notes:

The Revolution RS for the Mitsubishi Lancer GT is an aggressive looking, but mild sounding system. The large free-flow race axle-back provides excellent sound suppression for the 4B12 engine. It’s also our lightest system for the car. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   JA32U

Engine:   4B12
Type:   axle-back system

Number of pieces:  1pc
Piping:   63.5mm (2.5")
Tip:   105mm (4.0") x L 120mm (4.7")  or non-removable (early model)
Gasket(s):    OEM  (qty: 0 included)
Resonator:   n/a

Weight:  9.5 lbs   (Stock weight  15.5 lbs)
Sound level:  92 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138101
Price:
475.00Buy Now
IMAGES:
Mitsubishi Evolution VIII/IX 2003-07

GReddy Revolution RS Exhaust

10138102
Car Make: Mitsubishi
Car Model: Evolution VIII/IX
Car Year: 2003-07
Notes:

The Revolution RS for the Mitsubishi Evo VIII / IX features full non-tapered 3” diameter piping. Perfect to be used with optional 3” downpipe. The lightweight single sided cat-back exhaust uses a purposeful layout with minimal bends in the system. The design still maintains excellent sound levels and quality with a large resonator and extra-long RS muffler and tip. Classic GReddy styling positions the muffler and tip stylishly underneath the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   CT9A
Engine:   4G63T
Type:   cat-back system

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115mm (4.5") x L 185mm (7.2")  or non-removable (early model)
Gasket(s):    3.0" oval (qty: 1 included) 
Resonator:   Yes

Note: to reuse the OEM 02 sensor harness bracket, slight trimming is required.

Weight: 25.3 lbs  (Stock weight  34.7 lbs)
Sound level:  82 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138102
Price:
740.00Buy Now
IMAGES:
Mitsubishi Evolution X 2008-14

GReddy Revolution RS Exhaust

10138103
Car Make: Mitsubishi
Car Model: Evolution X
Car Year: 2008-14
Notes:

The Revolution RS for the Mitsubishi EvoX features full non-tapered 3” diameter piping. Perfect to be used with optional 3” downpipe. The lightweight single sided cat-back exhaust shaves over 20lbs off the car. The design still maintains good sound levels and quality with a large resonator and extra-long RS muffler. Classic GReddy styling positions the muffler and tip stylishly underneath the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:   CZ4A
Engine:   4B11T
Type:   single-sided cat-back system (R)

Number of pieces:  2
Piping:   76mm (3")
Tip:   115mm (4.5")  x L170mm (6.7")   or non-removable (early model)
Gasket(s):    3" oval (qty: 1 included) replacement
Resonator:   Yes

Notes: reuse factory gasket and bolts for the mid-pipe

Weight:  22.5 lbs   (-20.21lbs)
Sound level:  98 dB(a) @ 5250 RPM

Dyno Chart
HP
:  +10.8 hp
TRQ:  +3  ft-lbs



*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138103
Price:
695.00Buy Now
IMAGES:
Mitsubishi Evolution VII / IX 2003-07

GPP RS Race Exhaust

10138403
Car Make: Mitsubishi
Car Model: Evolution VII / IX
Car Year: 2003-07
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2003-07 Mitsubishi Evolution VIII / IX is our most aggressive system for the turbocharged 4G63 and CT9A chassis. The RS-Race is ideally suited applications, which require less sound suppression and maximum flow (or customers who just want an aggressive sounding exhaust.) This light-weight, large diameter, full stainless-steel, 80mm (3.14”) with only the slight taper to 76mm(3") front flange (to be able to mate up to both stock and 3" front pipes), cat-back has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

SOUND CLIP

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   CT9A
Engine:   4G63 T
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   80mm (3.14")
Tip:   115 mm (4.5")
Gasket(s):    80mm oval (qty: 1 included) replacement
 

Weight:  TBA lbs   (Stock weight  34.7 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138403
Price:
600.00Buy Now
IMAGES:
Mitsubishi Evolution X 2008-16

GPP RS Race Exhaust 

10138404
Car Make: Mitsubishi
Car Model: Evolution X
Car Year: 2008-16
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2008-14 Mitsubishi Evolution X is our most aggressive system for the turbocharged 4B11 and CZ4A chassis. The RS-Race is ideally suited applications, which require less sound suppression and maximum flow (or customers who just want an aggressive sounding exhaust.) This light-weight, large diameter, full stainless-steel 80mm (3.14”) non-tapered, cat-back exits the (right) passanger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   CZ4A
Engine:   4B11 T
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   80mm (3.14")
Tip:   115 mm (4.5")
Gasket(s):    80mm oval (qty: 1 included) replacement
 

Weight:  TBA lbs   (Stock weight  20.2 lbs)
Sound level:  101 dB(a) * without optional silencer
                        96 dB(a) with  50mm optional silencer (sold separately)

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10138404
Price:
600.00Buy Now
IMAGES:
Mitusbishi Evolution X 2008-16

GReddy EVOlution GT Exhaust

10138300
Car Make: Mitusbishi
Car Model: Evolution X
Car Year: 2008-16
Notes:

The EVOlution GT for the Mitsubishi EvoX features full non-tapered 3” diameter piping with an aggressive dual angled muffler layout. The piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow This creates and improved performance and sound. The system is finished off with our classic Evo 115mm laser engraved GReddy tips. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis: CZ4A
Engine: 4B11T
Type: Cat-back system
(dual angled mufflers, with extended tips)


Number of pieces: 2pcs.
Piping: 76 mm (3")
Tip(s): 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: Yes

Notes: TBA

Weight: 28.9 lbs (stock 42.7lbs)
Sound level: 97 dB(a) @4500RPM

Dyno Chart
HP: 20 hp
TRQ: 10 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10138300
Price:
1095.00Buy Now
IMAGES:
Nissan GTR 2009-on

Supreme Ti Exhaust (94mm)

10128294
Car Make: Nissan
Car Model: GTR
Car Year: 2009-on
Notes:

[DISCONTINUED]


The ideal exhaust for the R35 GT-R is the 94mm GReddy Supreme TI. The design provides great performance for upgraded GT-Rs but still comfortable for milder GT-Rs. The large dual oval mufflers provide excellent sound suppression and sound quality, while large piping frees up power for the twin turbo VR engine. This version comes with a huge dual 80mm (3.15") to 94mm (3.7") Y-pipe. The construction is made up of carefully hand-built 94mm piping is pain-painstakingly "inch-welded" for excellent fitment and flow. Revised larger 125mm quad staggered Tips complete each 94mm R35 GReddy Supreme Ti system. 

[MOTO IQ In depth exhaust install feature]    SOUND CLIP

   (2017-on will remove exhaust valve and will require tuning to avoid check code)

 

Chassis: R35
Engine: VR38DETT
Type: Titanium Y-back system 
  with dual sideways mounted oval mufflers & GReddy logo bracket

Number of pieces: 3
Piping: 2x 80mm - 1x 94mm (3.7") - 2x 80mm (3.14")
Tip(s): 4x 125mm (4.9") Burnt-TI finish *updated
Gasket(s):  2x SS V-band clamps 
Resonator: No

Weight
: 29lbs (-31lbs)
Sound level: TBA dB(a)

HP: +TBA hp
TRQ: +TBA ft-lbs

*For USA customers, this product is for competition (racing) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing. It is illegal in the USA, to drive a vehicle on public roads or highways with this product installed.


Notes
:  use factory oval gasket at Y-pipe
for more details, please see our (Blog post)


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

*See our full list of R35 GT-R products*

Part #: 10128294
Price: 5495.00
IMAGES:
Nissan GTR 2009-on

Power Extreme - PE-R Exhaust

10123300
Car Make: Nissan
Car Model: GTR
Car Year: 2009-on
Notes:

R35 GTR  (Japanese Spec - Special Order)

  (2017-on will remove exhaust valve and will require tuning to avoid check code)
 *2017-on GTR is for Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

 

(PE-R SUS) -Stainless-steel single to Quad with  quad Spectrum Elite tips

 

 

90mm to quad 60mm, quad inline mufflers, 4x 115mm tips

91dB(L)-92dB(R) / 4800RPM

2pcs. - cat-back

ideal for use with GReddy Circuit Spec Y-pipe & Front Pipes

For more details, please see our  (GR-9 Blog)

Part #: 10123300
Price: 4000.00
IMAGES:
VIDEO:
view video
Nissan 370Z 2009-16

GReddy Revolution RS Exhaust  

10128101
Car Make: Nissan
Car Model: 370Z
Car Year: 2009-16
Notes:

The Revolution RS for the Nissan 370Z is a light-weight Y-back exhaust with large diameter piping and an aggressive growl. The system includes a high flow Y-pipe that connects both engine banks through dual 2.5” (63.5mm) piping that merge smoothly into 3” (76mm) piping and a large resonator on the mid-pipe. The system exits an extra long, high-flow, RS muffler on the driver-side to manage sound output and avoid having to relocate the EVAP system. Dyno test have shown 11whp / 16ft-lbs gain on a normally-aspirated VQ37HR engine. Even with the large diameter piping, there is a 50% weight savings over the OEM stock system. Like all GReddy Revolution RS systems, it is a fully hand-welded 304 Stainless-Steel exhaust, that carries a Limited Lifetime Warranty.
 

SOUND CLIP

Note: included tip is not compatible with Nismo bumpers, Optional extended tips sold separately.

Chassis:   Z34
Engine:   VQ37HR 
Type:   Cat-back exhaust with single sided muffler (left exit)

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5") x L 170mm (6.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   yes

Weight:  28.8 lbs   (Stock weight  57.2 lbs)
Sound level:  102 dB(a)

HP:  +11  hp
TRQ:  +16  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128101
Price:
925.00Buy Now
IMAGES:
Nissan Juke 2010-16

GReddy EVOlution GT Exhaust

10128302
Car Make: Nissan
Car Model: Juke
Car Year: 2010-16
Notes:

The EVOlution GT exhaust for the Nissan Juke (FWD) enhances performance, while maintaining excellent sound levels for everyday driving. Power test have shown 10whp/11ft-lbs of torque increase, with a rich throaty sound. During cruising speeds, you can enjoy very comfortable sound levels, with no drone. The unique design of the compact EVO GT off-set tip muffler, provides ideal piping clearance, even with the large 76mm (3”) diameter piping. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis: 
Engine: MR16DDT
Type: 2WD only

Number of pieces: 2pcs
Piping: 76mm (3.0")
Tip(s): 115 mm (4.5")
Gasket(s): 3.0" oval (qty: 1 included) replacement
Resonator: yes

Notes: also fits, Nismo model (must remove small brace)

Weight: 24.7 lbs 
Sound level: 88 dB(a) @4750RPM

Dyno Chart
HP: 10 hp
TRQ: 11 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10128302
Price:
700.00Buy Now
IMAGES:
Nissan 370Z 2009-16

GReddy EVOlution GT Exhaust

10128303
Car Make: Nissan
Car Model: 370Z
Car Year: 2009-16
Notes:

The EVOlution GT for the Nissan 370Z is not only ideal for turbocharged VQ37s but also makes great power for normally aspirated applications. Dyno test on a N/A car gained as much as 16whp / 19ft-lbs, with more expected for turbo use. The dual cat-back exhaust progresses from a 2.5” Y that transitions smoothly into 3" X-pipe crossover, to dual resonator for equalizing exhaust pressures and improved sound control. Aggressive dual EVO muffler canisters are angled to match the Z looks while making room for the factory EVAP canister. GReddy single-wall slash tips finish off the system under the factory bumper cut-outs. Like all GReddy EVOlution GT systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Note: not compatible with Nismo bumper. 

Chassis: Z34
Engine: VQ37HR
Type: full dual cat-back with X-pipe


Number of pieces: 4pcs.
Piping: 2x 63.5mm (2.5") to 2x 76 mm (3.0")
Tip(s): T115 mm (4.5")
Gasket(s): 3.0" oval (qty: 3 included) replacement
Resonator: yes, 2x

Notes: * No EVAP relocation necessary

Weight: 51.4 lbs (stock 57.2lbs)
Sound level: 99/100 dB(a) @4500RPM

Dyno Chart
HP: 16 hp
TRQ: 19 ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10128303
Price:
1295.00Buy Now
IMAGES:
Nissan Skyline GT-R 1989-94

GReddy EVOlution GT Exhaust

10128305
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: 1989-94
Notes:

The EVOlution GT exhaust for the BNR32 Nissan Skyline GT-R is the ideal combination of performance, sound and JDM styling. The cat-back system aims to bring modern advancements to this Japanese turbocharged classic. The 76mm piping and compact EVO GT muffler with off-set tip, offer improved ground clearance over older exhaust systems, while still offering excellent flow through the straight though design. The deep growl of the RB26DETT is enhanced, while eliminating any drone, with use of our large center pipe resonator and extra long EVO canister. Refined sound, new and improved materials with timeless GReddy Evo styling, make this system the perfect choice for newly imported BNR32 Skyline GT-Rs.  Like all GReddy EVOlution GT systems, the fully hand-welded 304 Stainless-Steel exhaust, carries our Limited Lifetime Warranty.

SOUND CLIP

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2
Piping: 76 mm (3")
Tip: 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: yes

Notes:

Weight: 24.4 lbs 
Sound level: 100dB(a) @5600RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10128305
Price:
725.00Buy Now
IMAGES:
Nissan 350Z 2003-08

GPP RS Race Exhaust

10128404
Car Make: Nissan
Car Model: 350Z
Car Year: 2003-08
Notes:

 superseds  10128403 (full Y-back system)

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2003-08 Nissan 350Z is our most aggressive system for the Z33 chassis. The RS-Race is ideally suited for turbocharged or other race engine applications (or customers who just want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, full stainless-steel 3.0” (76mm) cat-back exits the (left) driver-side and includes a high flow Y-pipe with no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

Chassis:   Z33
Engine:  VQ35DE /HR

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5")
Gasket(s):   3" oval (qty: TBA included) replacement

Sound level:  105 dB(a) @ 4950RPM *without optional silencer


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128404
Price:
810.00Buy Now
IMAGES:
Nissan 370Z 2009-14

GPP RS Race Exhaust 

10128406
Car Make: Nissan
Car Model: 370Z
Car Year: 2009-14
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2009-16 Nissan 370Z is our most aggressive system for the Z34 chassis. The RS-Race is ideally suited for turbocharged or other race engine applications (or customers who just want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, full stainless-steel 3.0” (76mm) cat-back exits the (left) driver-side and includes a high flow Y-pipe with no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

Note: included tip is not compatible with Nismo bumpers, Optional extended tip sold separately.

Chassis:   Z34
Engine:  VQ37HR

Number of pieces:  3pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5")
Gasket(s):   3" oval (qty: TBA included) replacement
 

Weight:  24.8 lbs   (Stock weight  TBA lbs)
Sound level:  102 dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128406
Price:
810.00Buy Now
IMAGES:
Nissan 240SX 1989-94

GPP RS Race Exhaust

10128409
Car Make: Nissan
Car Model: 240SX
Car Year: 1989-94
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 1989-94 Nissan S13 (240SX) is an aggressive system for the 240SX (hatchback & coupe.) The RS-Race is ideally suited for turbocharged KA24DE, SR20DET or other race engine applications (or customers who just want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

SOUND CLIP

 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   S13
Engine:  KA24DE / SR20DET
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115 mm (4.5")
Gasket(s):    3" oval (qty: TBA included) replacement
 

Weight:  20.5 lbs   (Stock weight  34.7 lbs)
Sound level:  107 dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128409
Price:
600.00Buy Now
IMAGES:
Nissan 350Z 2003-08

GPP RS Race Exhaust 

10128403
Car Make: Nissan
Car Model: 350Z
Car Year: 2003-08
Notes:

GReddy Performance Products RS-Race Exhaust 

(does not include Y-pipe)

The GPP RS-Race for the 2003-08 Nissan 350Z is our most aggressive system for the Z33 chassis. The RS-Race is ideally suited for turbocharged or other race engine applications (or customers who just want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, full stainless-steel 3.0” (76mm) cat-back connects to the factory Y-pipe (or direct bolt-on replacement Y-pipes.)  The RS Race muffler and longer 170mm long tip exits the (left) driver-side and eliminates the pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish)L170

Chassis:   Z33
Engine:  VQ35DE /HR

supersedes older 10128405

Number of pieces:  2pcs
Piping:   2x 63.5mm (2.5") - 76mm (3.0")
Tip:   115 mm (4.5") x L170mm
Gasket(s):   3" oval (qty: 1 included) replacement

Sound level:  104dB(a) @ 4950RPM *without optional silencer


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10128403
Price:
600.00Buy Now
IMAGES:
Nissan Skyline GT-R 1989-94

GReddy Super Street Titan Exhaust

10123401
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: 1989-94
Notes:

 

 

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system



 

Part #: 10123401
Price: 2600.00
IMAGES:
Nissan Skyline GT-R 1999-02

GReddy Power Extreme R - Ver.2 Exhaust

10123307
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: 1999-02
Notes:

Power Extreme R BNR34 Ver.2

■ Adopts a completely straight structure that emphasizes exhaust efficiency, which has been established in the GReddy muffler series.

■ High quality sound that emphasizes power while eliminating sound in the room

■ Double 102Φ tail that best matches the notch of the rear bumper creates a powerful rear view

■ We buff finish SUS 304 material and consider durability

■ Produce a sense of quality with the adoption of a titanium-like heat gradation tail

■ Reliable JASMA muffler (conforms to security standards)

SOUND CLIP

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system


Specs:

■ Main pipe diameter: 80Φ ~ 60Φx2 ■ Exchange part: After catalyst
■ Division number: 2 divisions
■ Material: Stainless steel
■ Tail shape: 102Φ titanium-like heat gradation
■ Product close exhaust noise: 93dB / 5100rpm
■ Genuine proximity exhaust noise: 92dB / 5100rpm
■ Minimum clearance: 92mm: middle silencer
(Fender height: Right front 659mm / Left front 660mm / Right back 658mm / Left back 659mm
Note: The measurement vehicle is a vehicle with harmonic drive
■ Accessories: 80Φ oval gasket x2 / 10x25mm bolt x2

Part #: 10123307
Price: CALL
IMAGES:
Nissan Skyline GT-R 1999-02

GReddy Power Extreme R - DD Exhaust

10123308
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: 1999-02
Notes:

Power Extreme R BNR34 DD

Produces a stylish rear view with a spartan using a small-diameter dual silencer.

Product features

■ Adopts a small diameter dual silencer for the rear silencer and produces a stylish rear view with Spartan

■ In order to meet safety standards while adopting a rear small-diameter silencer, a total of four silencers and an additional resonator (with GReddy logo plate) are installed, and silence is achieved with a straight structure without using a diaphragm or partition inside the silencer.

■ Simple silencer arrangement for powerful sound quality outside the car and comfortable interior space without muffled sound

■ Considering texture and durability with buffed SUS304 material and full Tig welding

■ Produce a sense of quality with the adoption of a titanium-like heat gradation tail

■ JASMA certified muffler for safety (security standard compliant)

SOUND CLIP

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2
Piping: 76 mm (3")
Tip: 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: yes

Specs:

 

■ Main pipe diameter: 80Φ-60Φx2
■ Exchange site: After the catalyst
■ Division number: 2 divisions
■ Material: Stainless steel
■ Tail shape: 90Φ titanium heat gradation
■ Product close exhaust noise: 93dB / 5100rpm
■ Genuine proximity exhaust noise: 92dB / 5100rpm
■ Minimum ground clearance: 91mm: middle silencer
(Fender height: Right front 658mm / Left front 660mm / Right back 657mm / Left back 658mm)
   Note: The measurement vehicle is a vehicle with harmonic drive
■ Accessories: 80Φ oval gasket x2 / 10x25mm bolt x2 / attached stay / attached insulator

Part #: 10123308
Price: CALL
IMAGES:
Nissan GTR 2009-on

GReddy Super Street Titan - Ti Exhaust

10123403
Car Make: Nissan
Car Model: GTR
Car Year: 2009-on
Notes:

Super Street Titan Muffler-section (Titanium) R35 90#-60#X4-115#X4

  (2017-on will remove exhaust valve and will require tuning to avoid check code)
 *2017-on GTR is for Off-road use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing.
**This product is illegal to be driven on public roads in the USA.

 

* For grades other than the MY17 Pure Edition with a genuine titanium muffler with a genuine valve, removing the genuine muffler will cause the engine check lamp to light up and make it impossible to run. Therefore, measures such as rewriting the ECU will be required.

485ps car and 530ps car of 10/04-11/10 are not applicable

Not compatible with GT-R NISMO (600PS)

■ Minimum ground clearance: 116mm [Flange]

 


Part #: 10123403
Price: 6000.00
IMAGES:
Nissan Skyline GT-R BNR32

Trust PE-TR Exhaust - NEW

10127310
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: BNR32
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for 
1989-94 Nissan Skyline GT-R 

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system

PE-TR VIDEO


Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 115mm (4.5") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) replacement
Resonator: resonating-volume canister
Notes:  Made in Japan, TRUST logo


Part #: 10127310
Price:
1150.00Buy Now
Nissan Skyline GT-R BCNR33

Trust PE-TR Exhaust - NEW

10127311
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: BCNR33
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for 
1995-98 Nissan Skyline GT-R 

Chassis: BCNR33
Engine: RB26DETT
Type: Cat-back system

 


Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 115mm (4.5") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) replacement
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo

Part #: 10127311
Price:
1150.00Buy Now
Nissan Skyline GT-R BNR34

Trust PE-TR Exhaust - NEW

10127312
Car Make: Nissan
Car Model: Skyline GT-R
Car Year: BNR34
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for 
1999-02 Nissan Skyline GT-R 

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system

 


Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 115mm (4.5") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) 
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo

Part #: 10127312
Price:
1150.00Buy Now
Nissan 400R V37

Power Extreme R (JDM spec) - NEW

10123309
Car Make: Nissan
Car Model: 400R
Car Year: V37
Notes:

GREDDY POWER EXTREME R EXHAUST

V37 Nissan 400R (JDM spec)

■ Proximity exhaust noise (product): 82dB (right), 83dB (left) / 4800rpm
■ Proximity exhaust noise (genuine): 81dB (right) / 80dB (left) / 4800rpm
■ Minimum ground clearance: 97mm (pipe under the rear member) * Measurement vehicle is a low-down vehicle
■ Fender height: 673 mm in front right, 674 mm in front left, 679 mm in rear right, 677 mm rear left
■ Division / Caliber: 5 divisions / 60φ ~ 70φ
■ Replacement site: After the second catalyst
■ Tail shape: 115φ GTS
■ Material: SUS
* It is necessary to remove the tow hook (rear right) when installing.

≪Accessories≫
■ 60φ elliptical gasket
■ 10 × 25 mm set bolt
■ A set of bracket hoses for moving the canister
■ Bracket for moving the rear stay

Part #: 10123309
Price: 3400.00
RS Muffler Silencer RS 105mm Tip Dia 51mm

Optional RS Muffler, 105mm Dia. Tip Silencer - Dia. 51mm

11001202
Car Make: RS Muffler Silencer
Car Model: RS 105mm Tip
Car Year: Dia 51mm
Notes:

1x  Revolution RS 51mm Dai. Muffler Silencer for GReddy Revolution RS 105mm Tip

      Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (140mm dia.)
     GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   102mm (4.48")
Silencer Pipe Dia.:   51mm (2.0")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

    *Available in Silencer Pipe Diameters 51mm or 38mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 2.5" / 140mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001200 - 51mm silencer for 115mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip


Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001202
Price:
50.00Buy Now
IMAGES:
RS Muffler Silencer RS 115mm Tip Dia 43mm

Optional RS Muffler, 115mm Dia. Tip Silencer - Dia. 43mm

11001201
Car Make: RS Muffler Silencer
Car Model: RS 115mm Tip
Car Year: Dia 43mm
Notes:

1x  Revolution RS 43mm Dai. Muffler Silencer for GReddy Revolution RS 115mm Tip

      Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (160mm dia.)
     GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   114mm (4.48")
Silencer Pipe Dia.:   43mm (1.69")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

    *Available in Silencer Pipe Diameters 51mm or 43mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 3" / 160mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001200 - 51mm silencer for 115mm RS Tip

p/n 11001202 - 51mm silencer for 105mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip


Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001201
Price:
50.00Buy Now
IMAGES:
RS Muffler Silencer RS 115mm Tip Dia 51mm

Optional RS Muffler, 115mm Dia. Tip Silencer - Dia. 51mm

11001200
Car Make: RS Muffler Silencer
Car Model: RS 115mm Tip
Car Year: Dia 51mm
Notes:

1x  Revolution RS 51mm Dai. Muffler Silencer for GReddy Revolution RS 115mm Tip

      Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (160mm dia.)
     GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   114mm (4.48")
Silencer Pipe Dia.:   51mm (2.0")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

    *Available in Silencer Pipe Diameters 51mm or 43mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 3" / 160mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001202 - 51mm silencer for 105mm RS Tip
p/n 11001203 - 38mm silencer for 105mm RS Tip


Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001200
Price:
50.00Buy Now
IMAGES:
RS Muffler Silencer RS 105mm Tip Dia 38mm

Optional RS Muffler, 105mm Dia. Tip Silencer - Dia. 38mm

11001203
Car Make: RS Muffler Silencer
Car Model: RS 105mm Tip
Car Year: Dia 38mm
Notes:

1x  Revolution RS 38mm Dai. Muffler Silencer for GReddy Revolution RS 105mm Tip

      Maintain straight-through flow, with more muffler sound suppression.

*(also compatible with most (140mm dia.)
     GPP RS-RACE & GPP RS-Ti mufflers)

Tip Cup Dia.:   102mm (4.48")
Silencer Pipe Dia.:   38mm (1.5")
Pipe Length:   300mm (11.8")
Material:   304 Stainless-steel
Mounting pattern:   Revolution RS Tri-mounting

    *Available in Silencer Pipe Diameters 51mm or 38mm

Fits most GReddy Revolution RS, GPP RS-Race & GPP RS-Ti 2.5" / 140mm dia mufflers.
- Call to check compatibility with your application. (949) 588-8300

Also available in:
p/n 11001201 - 43mm silencer for 115mm RS Tip
p/n 11001200 - 51mm silencer for 115mm RS Tip
p/n 11001202 - 51mm silencer for 105mm RS Tip


Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

** Not compatible with Universal Revolution RS with weld-on tips.

Part #: 11001203
Price:
50.00Buy Now
IMAGES:
Scion FR-S 2013-16

Super Street Titan Ti Exhaust

10113403
Car Make: Scion
Car Model: FR-S
Car Year: 2013-16
Notes:

Chassis: ZN6

Engine: 4U-GSE

Full Titanium Single to dual piping and dual muffler section cat-back exhaust
with adjustable tip lenght 

Number of Pieces:  3

Piping: Titanium 60mm to dual 50mm

Tip: Titanium 115mm (Adjustable length)

Resonator:  Yes

Silencer: No

Weight: 18.0 lbs

Sound level: 92/90 dBA

 Also see: Facebook - GReddy FR-S

Part #: 10113403
Price: 3900.00
IMAGES:
VIDEO:
view video
Scion / Subaru FR-S / BRZ 2013-16

GReddy EVOlution GT Exhaust

10118300
Car Make: Scion / Subaru
Car Model: FR-S / BRZ
Car Year: 2013-16
Notes:

 

The EVOlution GT for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
(dual angled mufflers, with extended tips)

Notes:  * not compatiable with 2017 models - 2017 models use p/n 10118301

Number of pieces: 3
Piping: 76 mm (3.0") - dual 76mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0"/ oval (qty: 2 included) replacement (1x spl. composite gasket )
Resonator: Yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight: TBA lbs 
Sound level: L94 / R93 dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs

*Also see our GReddy Air Intake System for the FR-S / BRZ*

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10118300
Price:
950.00Buy Now
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

CS GTS Ver.3 (JDM quad tip) 

10110733
Car Make: Scion / Subaru
Car Model: FR-S / BRZ
Car Year: 2013-16
Notes:

JDM - Limited Edition TRUST Comfort Sports GTS Ver.3 exhaust.

  * compatiable with JDM TRD bumper only

Chassis: ZN6

Engine: 4U-GSE

Single to dual piping and dual muffler section cat-back exhaust

Number of Pieces:  3

Piping:  60mm (2.36in) to dual 60mm (2.36")

Tip: Quad Double Wall Stainless Steel

         with burnt Ti colored finish

Resonator:  Yes

Silencer: No

Sound level: 93-94 dBA

Part #: 10110733
Price: 2300.00
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

GReddy Revolution RS Exhaust

10118102
Car Make: Scion / Subaru
Car Model: FR-S / BRZ
Car Year: 2013-16
Notes:

The Scion FR-S & Subaru BRZ for the Revolution RS offers aggressive looks, yet has controlled deep exhaust tone. It features full 3” diameter piping for superior performance. The purposeful single-sided cat-back layout exits the left side of the vehicle and produces an effective but light-weight system. The extra large GReddy resonator controls unwanted drone.  Like all GReddy Revolution RS systems the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
( large diameter single muffler system)

Note: * not compatiable with 2017 models

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:    115mm (4.5") x L 150 (5.9")
Gasket(s):    3.0" oval (qty: 1 included) replacement
Resonator:   yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  21.5 lbs   (Stock weight  39 lbs)
Sound level:  107* dB(a) 

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118102
Price:
700.00Buy Now
IMAGES:
Scion / Subaru FR-S / BRZ / 86 2013-17

GReddy Supreme SP Exhaust

10118206
Car Make: Scion / Subaru
Car Model: FR-S / BRZ / 86
Car Year: 2013-17
Notes:

Also Compatible with 2017 Toyota 86 and 2017-20 Subaru BRZ!

The Supreme SP for the Scion FR-S & Subaru BRZ features a large horizontally mounted, 3-section muffler with a center inlet and an unique, tuned, internal "Y-pipe." This directs exhaust gases through a center chamber to reduce overall sound and improves flow to the outer straight-through sections. These outer sections of the muffler have our updated high-temp, internal sound suppression system. The exhaust is finished-off with dual GReddy slant-cut, double-walled tips in the factory bumper outlets. This cat-back exhaust also uses a simplified exhaust pipe routing with a large straight-through resonator in the mid-pipe, to tune-out any drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

NOTE:  Becuse the Supreme SP for this model uses a factory type "donut gasket" flange to the factory piping, it fits both the 2012-16 FR-S / BRZ and the 2017-on "kouki" 86 / BRZ models (the slight change in the OEM factory over-pipe does not effect fitment on the Supreme SP). 

 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
 (horizontally mounted muffler with dual tips)

Number of pieces:  3
Piping:   63.5 mm (2.5")
Tip(s):   2x 115mm (4.5")
Gasket(s):  2.5" oval (qty: 2 included) replacement
Resonator:   Yes

Notes:  reuse factory doughnut-gasket and spring bolts for mid-pipe

Weight:  34.8 lbs   (-3.3 lbs)
Sound Comparison (SAE J1169) Test:  L82 / R83 dB(a) @4500RPM 

Dyno Chart
HP
:  +6 hp
TRQ:  +7.5  ft-lbs

* also fits 2017 Toyota 86  Manual Trans 


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. **Test results may vary from car to car

Part #: 10118206
Price:
900.00Buy Now
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

GPP RS Race Exhaust 

10118409
Car Make: Scion / Subaru
Car Model: FR-S / BRZ
Car Year: 2013-16
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2012-16 Scion FR-S & Subaru BRZ is our most aggressive system we offer for the ZN6 chassis. The RS-Race is ideally suited for turbocharged, race applications (or customers who want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, single-sided, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust exits the (left) driver-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

Sound Clip

  * Optional Tip Silencer : 51mm / 43mm

  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accomidate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:  4U-GSE (FA20)
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115 mm (4.5") x L170mm (6.7")
Gasket(s):   3" oval (qty: TBA included) replacement

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.
 

Weight:  17.6 lbs   (Stock weight  39 lbs)
Sound level:  102 dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118409
Price:
600.00Buy Now
IMAGES:
Scion / Subaru FR-S / BRZ 2013-16

CS GTS Ver.2 (JDM spec)

10110732
Car Make: Scion / Subaru
Car Model: FR-S / BRZ
Car Year: 2013-16
Notes:

JDM - Edition TRUST Comfort Sports GTS Ver.2 exhaust.

Chassis: ZN6

Engine: 4U-GSE

Single to dual piping and dual muffler section cat-back exhaust

Number of Pieces:  2

Piping:  60mm (2.36in) to dual 50mm (2")

Tip: 115mm (4.5in.)  Double Wall Stainless Steel

         with burnt Ti colored finish

Resonator:  Yes

Silencer: No

Weight: 30.8 lbs

Sound level: 94-93 dBA

*Also see our GReddy Air Intake System for the FR-S*

 Also see: Facebook - GReddy FR-S

Part #: 10110732
Price: 1850.00
IMAGES:
VIDEO:
view video
Subaru STI (HB) 2009-14

GReddy Supreme SP Exhaust

10168200
Car Make: Subaru
Car Model: STI (HB)
Car Year: 2009-14
Notes:

The Supreme SP for the Subaru STI hatchback features a large horizontally mounted, 3-section muffler with a "tucked-away" layout. This routing allows for the large 3” diameter piping to more smoothly enter the muffler’s center section. Exhaust gases exit each side of the revised muffler via the two 2.5” diameter piping to quad staggered 3.5” GReddy double-wall slash cut tips, The non-tapered 3” mid-pipe also encases a large resonator section to tune-out drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  GRB
Engine:  EJ25
Type:  cat-back system
  (horizontally mounted muffler with dual outlets)

Number of pieces:  3
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):  4x 89mm (3.5 ")
Gasket(s):  3" oval (qty: 2 included) replacement
Resonator:   Yes

Notes: reuse factory doughnut-gasket and hardward for mid-pipe

Weight:  39.8lbs  (-2.8lbs)
Sound level:  L82 / R83 dB(a) @4000

Dyno Chart
HP
:  +TBA  hp
TRQ:  +TBA  ft-lbs


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168200
Price:
995.00Buy Now
IMAGES:
Subaru STI / WRX Sedan 2015-18

GReddy Supreme SP Exhaust

10168202
Car Make: Subaru
Car Model: STI / WRX Sedan
Car Year: 2015-18
Notes:

The Supreme SP for the (VA) Subaru Sedan features large dual oval mufflers and quad staggered tips in a "tucked-away" layout, for maxium muffler ground clearance. Large 76mm (3”) piping is carefully routed around the rear differential to a centralized Y-section for more even flow. This creates and improved performance with exceptional sound for both the EJ powered STI and FA powered WRX applications. The system is finished off with classic quad Supreme SP 89mm laser engraved GReddy tips. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  VA2 / VA1
Engine:  EJ257 / FA20T
Type:   cat-back, dual muffler system

Number of pieces:  4
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):   4x 89 mm (3.5")
Gasket(s):    2x 2.5" & 1x 3" oval (qty: 3 included) replacement(s)
Resonator:   No

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168202
Price:
1195.00Buy Now
IMAGES:
Subaru STI / WRX Sedan 2011-14

GReddy Supreme SP Exhaust

10168201
Car Make: Subaru
Car Model: STI / WRX Sedan
Car Year: 2011-14
Notes:

The Supreme SP for the Subaru STI Sedan features much larger diameter piping, resonators and mufflers, but also smoothes the layout for maximum performance with good sound suppression. This cat-back exhaust starts out with a full 3” mid-pipe with a large straight-through resonator to tune out drone. The next section smoothly transitions into dual 2.5” diameter piping. Improved dual GReddy straight-through mufflers with dual, double wall tips on each muffler finish off the exhaust. GReddy designers carefully position the dual mufflers and staged tips to flow with the GV-chassis’ bodylines. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

SOUND CLIP

Vehicle(s): WRX & STI Sedan
Chassis
:  GV8
Engine:  EJ257
Type:  cat-back, dual muffler system

Number of pieces:  4
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):  4x 89 mm (3.5")
Gasket(s):  2x 2.5" & 1x 3" oval (qty: 3 included) replacement(s)
Resonator:   Yes

Weight: TBA  lbs  
Sound level:  L89 & R91 dB(a) @4000

Notes: reuse factory doughnut-gasket and hardward for mid-pipe

Dyno Chart
HP
:  +14 hp
TRQ:  +22 ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168201
Price:
1295.00Buy Now
IMAGES:
Subaru WRX / STI 2002-07

GReddy Revolution RS Exhaust

10168100
Car Make: Subaru
Car Model: WRX / STI
Car Year: 2002-07
Notes:

The Revolution RS for the GDB Subaru WRX/STI  features a full non-tapered 76mm (3”) diameter piping. The focused layout of the cat-back exhaust uses minimal bends to produces a cost-effective, light-weight system that saves 8lbs over the stock system. Traditional GReddy RS styling positions a large resonator and the muffler and tip fashionably underneath the vehicle, while enhancing the profile body-lines perfectly. Dyno test have shown increase in 8hp and 6ft-lbs of torque on a completely stock vehicle, with the potential for additional gains with other aftermarket modifications and/or tuning. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

SOUND CLIP

Chassis:  GDB
Engine:  EJ20 / EJ25
Type:   Cat-back system

Number of pieces: 2pcs
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L 170mm (6.7")
Gasket(s):    3.0" oval (qty: 1 included) replacement
Resonator:   Yes
 

Weight:  24.2 lbs   (Stock weight  32.1 lbs)
Sound level:  102 dB(a) 

HP:  +8.33  hp
TRQ:  +6.38  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168100
Price:
730.00Buy Now
IMAGES:
Subaru STI (sedan) 2011-14

GReddy Revolution RS Exhaust

10168101
Car Make: Subaru
Car Model: STI (sedan)
Car Year: 2011-14
Notes:

The Revolution RS for the Subaru WRX/STI sedan features full 3.0” diameter piping for superior performance. Dyno test have shown increase in 12hp and an amazing 32ft-lbs of torque. The purposeful single-sided cat-back layout with minimal bends produces a cost-effective, light-weight system. Classic GReddy styling positions the muffler and tip stylishly underneath the right side of the car while matching the profile body-lines perfectly. Like all GReddy Revolution RS systems, the exhaust is made from fully hand-welded 304 Stainless-Steel and carries a Limited Lifetime Warranty.

 

Chassis:  GV8
Engine:  EJ25
Type:   Single sided, cat-back exhaust system

Number of pieces: 2pcs
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L 150mm (5.9")
Gasket(s):    3.0 " oval (qty: 1 included) replacement
Resonator:   Yes
Optional Silencer Available: TBA

Weight:  25.3 lbs  
Sound level:  98 dB(a)

HP:  +12  hp
TRQ:  +31  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168101
Price:
725.00Buy Now
IMAGES:
Subaru STI / WRX Sedan 2011-14

GReddy EVOlution GT Exhaust

10168300
Car Make: Subaru
Car Model: STI / WRX Sedan
Car Year: 2011-14
Notes:

The EVOlution GT for the (GV) Subaru Sedan features dual angled Evo mufflers and quad staggered tips for a stylish and aggressive layout. Larger 76mm (3”) piping is routed through a large resonator in the mid-pipe to control sound. This system provides great flow for both the STI and WRX turbo applications. The system is finished off with dual Y’s to our classic quad Evo 89mm laser engraved GReddy tips. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Vehicle(s): WRX & STI Sedan
Chassis: GV8 
Engine: EJ25
Type: Cat-back system 
(dual angled mufflers, with extended quad tips)

Number of pieces: 3pcs
Piping: 76 mm (3")
Tip(s): 89 mm (3.5")
Gasket(s): 3" oval (qty: 2x included) replacement (+1pc. 2bolt catalytic gasket)
Resonator: yes

Notes: fits both WRX and STI

Weight: TBA lbs 
Sound level: TBA dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10168300
Price:
1195.00Buy Now
IMAGES:
Subaru WRX STI 2015-on

GPP RS Race Exhaust

10168408
Car Make: Subaru
Car Model: WRX STI
Car Year: 2015-on
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2015-on Subaru WRX/STI is our most aggressive looking system for the VA sedan chassis. The RS-Race is ideally suited applications, which require less sound suppression and maximum flow. (with the factory catalytic converter, this application has a surprisingly mild sound level for cruising and a good rumble under wide open throttle.) This light-weight, large diameter, full stainless-steel 80mm (3.14”) non-tapered, cat-back exits the (right) passanger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

Sound Clip

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   VA2 / VA1
Engine:  EJ257 / FA20T
Type:   Cat-back exhaust

Number of pieces:  TBA pcs
Piping:   80mm (3.14")
Tip:   115 mm (4.5")
Gasket(s):  80mm oval (qty: 1 included)
   plus 1 specialized composite gasket 11000329 to replace factory "donut" gasket

Weight:  TBA lbs   (Stock weight  39 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168408
Price:
600.00Buy Now
IMAGES:
Subaru WRX STI (HB) 08-14

GPP RS Race Exhaust 

10168407
Car Make: Subaru
Car Model: WRX STI (HB)
Car Year: 08-14
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the Subaru 08-14 STI and 11-14 WRX hatchbacks is our most aggressive system for the turbocharged EJ25 in the GRB chassis. The RS-Race is ideally suited applications, which require less sound suppression and maximum flow (or customers who just want an aggressive sounding exhaust.) This light-weight, large diameter, full stainless-steel 80mm (3.14”) non-tapered, cat-back exits the (right) passanger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.


STI HB 08-14  and  WRX HB 11-14 only

 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

Chassis:   GRB
Engine:  EJ25 T
Type:   Cat-back exhaust

Number of pieces:  TBA pcs
Piping:   80mm (3.14")
Tip:   115 mm (4.5")
Gasket(s):  80mm oval (qty: TBA included) replacement
 

Weight:  TBA lbs   (Stock weight  39 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10168407
Price:
600.00Buy Now
IMAGES:
Subaru WRX STI VAB

Trust PE-TR Exhaust - NEW

10167310
Car Make: Subaru
Car Model: WRX STI
Car Year: VAB
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for
2015-2020  Suabru VAB  WRX STI

Chassis: VA
Engine: EJ / FA (Turbo)
Type: single exit (Left)  Cat-back system 
 


Number of pieces: 2pc
Piping: 70 mm (2.75")
Tip(s): 115mm (4.5") TRUST sliding tip (40mm range)
Gasket(s): 70" oval (qty: 1 included)
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo


* Optional Titanium Tips sold separately 

Part #: 10167310
Price:
1150.00Buy Now
SUS Tips DD-R Option 101mm

Replacement DD-R Tips (pair) std. length - NEW 

11001171
Car Make: SUS Tips
Car Model: DD-R Option
Car Year: 101mm
Notes:

Specifically for Greddy Performance Products DD-R 101mm systems

1set (2pcs) DD-R Burnt Titanium Tips with GPP logo L150mm (standard length)

Dia.: 101mm (4.0")
Length: 150 mm (5.9")
Material: 304 Stainless Steel
Mounting pattern: DD-R Tri-mounting
Logo: etched GPP

Standard DD-R tip length. Exclusively for GReddy Performance Products DD-R exhausts w
(150mm Tip Length)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

Part #: 11001171
Price:
$75.00Buy Now
IMAGES:
SUS Tips DD-R Option 101mm

Replacement DD-R Tips (pair) 175mm length - NEW 

11001169
Car Make: SUS Tips
Car Model: DD-R Option
Car Year: 101mm
Notes:

Specifically for Greddy Performance Products DD-R 101mm systems

1set (2pcs) DD-R Burnt Titanium Tips with GPP logo L175mm (longer length +25mm)

Dia.: 101mm (4.0")
Length: 175 mm (6.9")
Material: 304 Stainless Steel
Mounting pattern: DD-R Tri-mounting
Logo: etched GPP

Standard DD-R tip length. Exclusively for GReddy Performance Products DD-R exhausts 

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

Part #: 11001169
Price:
$75.00Buy Now
IMAGES:
Ti Tips DD-R Option 101mm

Optional DD-R Titanium Tips (pair) std. length - NEW

11002601
Car Make: Ti Tips
Car Model: DD-R Option
Car Year: 101mm
Notes:

Specifically for Greddy Performance Products 101mm DD-R systems

1set (2pcs) DD-R Burnt Titanium Tips with GPP logo (standard length)

Dia.: 101 mm (4.0")
Length: 150 mm (5.9")
Material: Titanium
Mounting pattern: DD-R Tri-mounting

Standard DD-R tip length. Exclusively for GReddy Performance Products DD-R exhausts w
(150mm Tip Length)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

Part #: 11002601
Price:
$175.00Buy Now
IMAGES:
Ti Tips DD-R Option 101mm

Optional DD-R Titanium Tips (pair) 170mm Length - NEW

11002602
Car Make: Ti Tips
Car Model: DD-R Option
Car Year: 101mm
Notes:

Specfically for Greddy Performance Products DD-R 101mm systems

1set (2pcs) DD-R Burnt Titanium Tips with GPP logo (extended length +20mm)

Dia.: 101mm (4.0")
Length: 170 mm (5.9")
Material: Titanium
Mounting pattern: DD-R Tri-mounting

Extended DD-R tip length. Exclusively for GReddy Performance Products DD-R exhausts w
(150mm standard Tip Length)

Notes: Requires 3mm Allen Head driver and 8mm wrench/socket to install

Part #: 11002602
Price:
$175.00Buy Now
IMAGES:
Toyota MR-2 1990-96

GReddy EVOlution GT Exhaust

10118303
Car Make: Toyota
Car Model: MR-2
Car Year: 1990-96
Notes:

The EVOlution GT exhaust for the (SW20) MR-2 Turbo is styled to resemble the legendary Power Extreme II MR-2 exhaust of the late 90’s-early 00’s. This makes the Evo GT the ideal exhaust system for a modern, period-correct SW20 MR-2 build. This new and improved version follows the same beautifully laid-out dual off-set muffler with extended wrapping tips, but it now, incorporates superior construction, improved stainless-steel materials and precision tig welding. The more compact, dual, straight-through EVO GT muffler canisters allow for great flow for both stock and upgraded turbo 3S-GTE engines. Like all GReddy EVOlution GT systems, this 304 Stainless-steel exhaust carries a limited lifetime warranty.

 

SOUND CLIP


Chassis: SW20
Engine: 3S-GTE (factory turbocharged)
Type: Cat-back exhaust
  (dual angled mufflers, with extended tips)

Number of pieces: 2pcs
Piping: 76 mm (3.0")
Tips: 2x 115 mm (4.5")
Gasket(s): 3.0" oval (qty: 1 included) replacement
Resonator: n/a

Notes: TBA

Weight: TBA lbs 
Sound level: TBA dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10118303
Price:
850.00Buy Now
IMAGES:
Toyota Supra TT JZA80

Trust PE-TR Exhaust - NEW

10117310
Car Make: Toyota
Car Model: Supra TT
Car Year: JZA80
Notes:

GReddy JDM-spec TRUST PE-TR exhaust for 
1993-98 Toyota Supra Twin Turbo 

Chassis: JZA80
Engine: 2JZ-GTE
Type: Cat-back system

 


Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 115mm (4.5") - TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) 
Resonator: resonating-volume canister
Notes:   Spl. mounting brackets included
             Made in Japan, TRUST logo


Part #: 10117310
Price:
1150.00Buy Now
Toyota / Subaru 86 /BRZ 2017-20

GReddy EVOlution GT Exhaust

10118301
Car Make: Toyota / Subaru
Car Model: 86 /BRZ
Car Year: 2017-20
Notes:

Specifically for the late-model 2017-on Toyota 86 / Subaru BRZ (updated mid-pipe)

The EVOlution GT for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
(dual angled mufflers, with extended tips)

Number of pieces: 3
Piping: 76 mm (3.0") - dual 76mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0" oval (qty: 2 included) replacement (1x spl. composite gasket)
Resonator: Yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight: TBA lbs 
Sound level: L94 / R93 dB(a) @4500RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs

*Also see our GReddy Air Intake System for the FR-S / BRZ*

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Part #: 10118301
Price:
950.00Buy Now
IMAGES:
Toyota / Subaru 86 / BRZ 2017-20

GPP RS Race Exhaust  

10118410
Car Make: Toyota / Subaru
Car Model: 86 / BRZ
Car Year: 2017-20
Notes:

GReddy Performance Products RS-Race Exhaust

The GPP RS-Race for the 2017-on Subaru BRZ / Toyota 86 is an aggressive system for the minor-change ZN6 chassis. The RS-Race is ideally suited for turbocharged or race applications (or customers who want an aggressive sounding exhaust), which require less sound suppression and maximum flow. This light-weight, single-sided, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust exits the (right) passenger-side and has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. For extra customization, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.
 

  * Optional Tip Silencer : 51mm / 43mm
  * Optional Titanium Tip (Burnt Finish) : L120 / L150 / L170

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accomidate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:   ZN6
Engine:  4U-GSE (FA20)
Type:   Cat-back exhaust

Number of pieces:  2pcs
Piping:   76mm (3.0")
Tip:   115 mm (4.5") x L185 (7.2)
Gasket(s):   3" oval (qty: TBA included) replacement

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.
 

Weight:  TBA lbs   (Stock weight  39 lbs)
Sound level:  TBA dB(a) *without optional silencer

HP:  TBA  hp
TRQ:  TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118410
Price:
600.00Buy Now
IMAGES:
Toyota / Subaru 86 / BRZ 2017-20

GReddy Revolution RS Exhaust

10118107
Car Make: Toyota / Subaru
Car Model: 86 / BRZ
Car Year: 2017-20
Notes:

An aggressive but controlled exhaust system for the Scion FR-S & Subaru BRZ is the Revolution RS. It features full 3” diameter piping for superior performance. Perfect for vehicles with forced-induction, like turbos, but it also includes a large mid-pipe resonator to help remove unwanted drone from the passanger compartment. The purposeful single-sided cat-back layout exits the right side of the vehicle and produces an effective but light-weight system. Like all GReddy Revolution RS systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

also 2017-on Subaru BRZ

 

NOTE:  From 2017-on the Toyota 86 and Subaru BRZ came with a slight change in the factory front "over-pipe" this change results in a need for a different position of the mid-pipe on many GReddy exhaust styles for the 2017-on "Kouki" models.  To accommodate this change, GReddy now offers two models of each Evolution GT, Revolution GT, RS-RACE and RS-Ti system, one system for the 2012-2016 FRS/BRZ and another revised system for the 2017-on 86/BRZ.

 

Chassis:  ZN6 Kouki (minor change)
Engine:  FA20
Type:   Cat-back system

Number of pieces
Piping:    76 mm ( 3.0 in.)
Tip:   115 mm (4.5 ") x L185mm  (7.2")
Gasket(s):    3.0 " oval (qty: 1 included) replacement
Resonator:   Yes
Optional Silencer Available: yes

Notes: replace factory doughnut-gasket and spring bolts for mid-pipe, with provided composite gasket and M8 nuts and bolts.

Weight:  23.1 lbs   (Stock weight  37.6 lbs)
Sound level:  102 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Part #: 10118107
Price:
700.00Buy Now
IMAGES:
Toyota / Subaru 86 / GR86 / BRZ ZN6 / ZN8

Power Extreme 3 (JDM spec) - NEW

10114300
Car Make: Toyota / Subaru
Car Model: 86 / GR86 / BRZ
Car Year: ZN6 / ZN8
Notes:

GREDDY POWER EXTREME 3 EXHAUST

10110737 – GReddy PE-3 Exhaust – GR86 BRZ(ZN8/ZD8)


Made in Japan, the JDM-spec., Power Extreme 3 dual muffler 60mm system for both the 86/BRZ and GR86/BRZ models, is a direct bolt-on exhaust with good flow and refine sound. The full stainless-steel, straight-though, cat-back exhaust system features a great combination of a large oval resonator  and dual PE mufflers to remove unwanted sound frequencies, while enhancing the FA20/FA24 growl.  The system is finished off with the dual 115mm full slash-cut burnt-Titanium tips.   Designed to work well with normally-aspirated and turbocharged applications. 


Years: 2012-22
Chassis: ZN6/ ZC6  ZN8 / ZD8
Engine: FA20  FA24
Type: SUS cat-back system
Dual PE mufflers with Titanium Tips
Note: TRUST GReddy JDM Spec.
          60-60x2-115#x2
Number of pieces: 3pcs
Piping: 60 mm (2.33")
Tips: PE3 Bunt Titanium 115mm (4.5")
Resonator: large offset oval type
Sound: JDM testing R:94/91dBa L:94/91dBa 5250RPM

Part #: 10114300
Price: 1950.00
Toyota / Subaru GR86 / BRZ ZN8

CS GTS (JDM spec) - NEW

10110737
Car Make: Toyota / Subaru
Car Model: GR86 / BRZ
Car Year: ZN8
Notes:

GREDDY COMFORT SPORTS GTS EXHAUST

10110737 – GReddy Comfort Sport GTS Exhaust – GR86 BRZ(ZN8/ZD8)


Made in Japan, the JDM-spec., Comfort Sport GTS 60mm axle-back system for the GR86/BRZ, is a direct bolt-on exhaust with very controlled and refine sound quality. The large straight-through, high polished stainless-steel oval CS muffler is one of our quietest systems for the FA24 boxer engine. The system is finished off with the dual 115mm GTS slash-cut double wall stainless steel tips with a burnt-Ti finish.


Years: 2022-
Chassis: ZN8 / ZD8
Engine: FA24
Type: axle-back system
Large oval muffler with dual L&R outlets
Note: TRUST GReddy JDM Spec.
          60-60x2-115#x2
Number of pieces: 1pcs
Piping: 60 mm (2.33")
Tip: GTS Bunt Ti finish 115mm (4.5")
Resonator: n/a
Sound: JDM testing R:85dBa L:84dBa 5250RPM



Part #: 10110737
Price:
1300.00Buy Now
Trust Tip PE-TR 115mm x L 110mm

Optional PE-TR Rolled Tip - Burnt-Ti

11007120
Car Make: Trust Tip
Car Model: PE-TR
Car Year: 115mm x L 110mm
Notes:

1x replacement TRUST PE-TR Tip (L 110mm)

  • TRUST logo engraved
  • Titanium - Burnt Finish
  • PE-TR Rolled Tip
  • Adjustable slotted mounting holes
  • allows for 40mm of length change.
  • Sized to specifically fit TRUST PE-TR only
  • Diameter 115mm
  • Base Length 110mm (short)

Other sizes also avaliable...

Part #: 11007120
Price:
140.00Buy Now
Trust Tip PE-TR 115mm x L 130mm

Optional PE-TR Rolled Tip - Burnt-Ti

11007121
Car Make: Trust Tip
Car Model: PE-TR
Car Year: 115mm x L 130mm
Notes:

1x replacement TRUST PE-TR Tip (L 130mm)

  • TRUST logo engraved
  • Titanium - Burnt Finish
  • PE-TR Rolled Tip
  • Adjustable slotted mounting holes
  • allows for 40mm of length change.
  • Sized to specifically fit TRUST PE-TR only
  • Diameter 115mm
  • Base Length 130mm (standard)

Other sizes also avaliable...

Part #: 11007121
Price:
150.00Buy Now
Trust Tip PE-TR 115mm x L 160mm

Optional PE-TR Rolled Tip - Burnt-Ti

11007122
Car Make: Trust Tip
Car Model: PE-TR
Car Year: 115mm x L 160mm
Notes:

1x replacement TRUST PE-TR Tip (L 160mm)

  • TRUST logo engraved
  • Titanium - Burnt Finish
  • PE-TR Rolled Tip
  • Adjustable slotted mounting holes
  • allows for 40mm of length change.
  • Sized to specifically fit TRUST PE-TR only
  • Diameter 115mm
  • Base Length 160mm (long)

Other sizes also avaliable...

Part #: 11007122
Price:
165.00Buy Now
Trust Tip PE-TR 115mm x L 190mm

Optional PE-TR Rolled Tip - Burnt-Ti

11007123
Car Make: Trust Tip
Car Model: PE-TR
Car Year: 115mm x L 190mm
Notes:

1x replacement TRUST PE-TR Tip (L 190mm)

  • TRUST logo engraved
  • Titanium - Burnt Finish
  • PE-TR Rolled Tip
  • Adjustable slotted mounting holes
  • allows for 40mm of length change.
  • Sized to specifically fit TRUST PE-TR only
  • Diameter 115mm
  • Base Length 190mm (extra long)

Other sizes also avaliable...

Part #: 11007123
Price:
190.00Buy Now
Trust Tip Silencer PE-TR 115mm > 60mm

Optional PE-TR Tip Silencer

11007126
Car Make: Trust Tip Silencer
Car Model: PE-TR
Car Year: 115mm > 60mm
Notes:

1x replacement TRUST PE-TR Tip Silencer

  • For TRUST PE-TR 80mm exhaust with 115mm Dia. Tips only
  • 60mm ID restrictor
  • Provided extra sound supression for PE-TR
  • Removable 

Part #: 11007126
Price:
50.00Buy Now
Trust Tip Silencer PE-TR 115mm > 50mm

Optional PE-TR Tip Silencer

11007127
Car Make: Trust Tip Silencer
Car Model: PE-TR
Car Year: 115mm > 50mm
Notes:

1x replacement TRUST PE-TR Tip Silencer

  • For TRUST PE-TR 80mm exhaust with 115mm Dia. Tips only
  • 60mm ID restrictor
  • Provided extra sound supression for PE-TR
  • Removable 

Part #: 11007127
Price:
50.00Buy Now
Universal 2.5" Muffler & Tip Dia. 140mm

GReddy Revolution RS Exhaust (with non removable tip)

11001125
Car Make: Universal 2.5"
Car Model: Muffler & Tip
Car Year: Dia. 140mm
Notes:

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!
 

2.5" Dia. Universal Muffler and Tip set

Muffler Type: 140mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 63.5mm (2.5")
    Dia.: 140mm (5.5") 
    Length: 300mm (11.8")

Tip Type: Single-wall Stainless-steel with GReddy Logo non-removable
   Dia.: 103mm (4.0")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Not compatible with optional Revolution RS Tips and Silencers

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #: 11001125
Price:
180.00Buy Now
IMAGES:
Universal 2.5" Muffler & Tip Dia. 140mm

GReddy Revolution RS Muffler (w/ removable tip)

11001126
Car Make: Universal 2.5"
Car Model: Muffler & Tip
Car Year: Dia. 140mm
Notes:

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Now with our Tri-bolt removable Tip, optional GReddy RS tips of different length, material and shape are also be purchased separately for more customization. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!
 

2.5" Dia. Universal Muffler and Tip set

 * Compatiable with other 105mm RS (Stainless & Titanium) Tips and Silencers

Muffler Type: 140mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 63.5mm (2.5")
    Dia.: 140mm (5.5") 
    Length: 300mm (11.8")

Tip Type: Removable Single-wall Stainless-steel with GReddy Logo with Tri-bolt mounting
   Dia.: 105mm (4.1")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Compatible with optional Revolution RS Tips and Silencers

   *** also see our RS-Ti Universal Muffler & Tip sets

 

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #: 11001126
Price:
200.00Buy Now
IMAGES:
Universal 2.5" Muffler & Tip Dia. 160 x L300

RS-Ti Titanium Muffler (w/ removable tip and V-band)

11002525
Car Make: Universal 2.5"
Car Model: Muffler & Tip
Car Year: Dia. 160 x L300
Notes:

GPP Universal RS-Ti Titanium Muffler and Tip sets create new lightweight options for creating your own custom full Ti or hybrid Ti/steel exhaust system. In addition to the Titanium RS Muffler canister and tip, each kit includes a stainless-steel muffler mounting-band (to weld on mounting hangers), pre-welded titanium inlet pipe and V-band Ti flange, as well as a matching stainless-steel V-band flange and clamp (to adapt the kit to steel piping.) The kits are available in a 3.0” (76mm) and 2.5” (63.5mm) piping sizes. Our signature high quality, straight-through, universal RS racing sport muffler design offers exceptional flow with a clean, yet aggressive exhaust note. And with the RS Tri-bolt removable Tip, optional RS inner tip silencers and tips can be purchased separately for even more customization.

No Titanium Welding Necessary! 

With the included pre-welded Titanium V-band flange and additional stainless-steel flange and stainless steel muffler cansister mounting bracket, you do not have to be able to weld Titanium to have a custom Titanium muffler, exhaust system. Just weld onto the provided flange and canister mounting bracket.

2.5" (76mm)  Dia. Universal Titanium Muffler and Tip set




Muffler Type: 140mm Round RS Titanium
Type: Straight-through
Inlet / Outlet : 63.5mm (2.5") V-Band flange
Dia.: 140mm (5.5")
Length: 300mm (11.8")
Surface: brunt-Titanium brushed finish, with GPP badge

Tip Type: Removable Single-wall Titanium with RS-Ti Logo with Tri-bolt mounting
Dia.: 105mm (4.1")
Length: 120mm (4.7")
Surface: brunt-Titanium brushed finish, with laser-etched RS-Ti logo

Piping Extension: L38mm (1.5")
+ 2.5" piping at the back of the muffler, with a pre-welded 3.0" 2-bolt Titanium flange

Additional Mounting Hardware included:
+ additional un-welded stainless-steel 2.5" V-band flange (to adapt to steel or stainless steel piping)
+ one stainless steel V-band flange and clamp
+ a stainless-steel muffler canister mounting band. (to weld on steel or stainless steel muffler mounting hangers)

Notes:
requires welding (and cutting) for mounting and attaching piping


** Compatible with optional Revolution RS Tips and Silencers

Part #: 11002525
Price:
355.00Buy Now
Universal 2.5" Oval Muffler & Tip 260 x 160 x L300

RS-Ti Oval Titanium Muffler (w/ removable tip and V-band) - New

11003525
Car Make: Universal 2.5"
Car Model: Oval Muffler & Tip
Car Year: 260 x 160 x L300
Notes:

GPP Universal RS-Ti Titanium Muffler and Tip sets create new lightweight options for creating your own custom full Ti or hybrid Ti/steel exhaust system. In addition to the Titanium Oval Muffler canister and tip, each kit includes a stainless-steel oval muffler mounting-band (to weld on mounting hangers), pre-welded titanium inlet pipe and V-band flange, as well as a matching stainless-steel V-band flange and clamp (to adapt the kit to steel piping.) The kits are available in a 3.0” (76mm) and 2.5” (63.5mm) piping sizes. Our signature high quality, straight-through, universal muffler design offers exceptional flow with a clean, optimized exhaust note. And with the 105mm RS Tri-bolt removable Tip, optional 105mm RS inner tip silencers and tips can be purchased separately for even more customization.

No Titanium Welding Necessary! 

With the included pre-welded Titanium V-band flange and additional stainless-steel flange and stainless steel oval muffler canister mounting bracket, you do not have to be able to weld Titanium to have a custom Titanium muffler, exhaust system. Just weld onto the provided flange and canister mounting bracket.

2.5" (76mm)  Dia. inlet Universal Oval Titanium Muffler and 105mm Tip set




Muffler Type: W260 x H160 x L300mm Oval Titanium (10.2"x6.3"x11.8")
Type: Straight-through
Inlet : Centered 63.5mm (2.5") V-band flange
Outlet : Center, Offset 20mm down 103mm (4") RS 3-bolt
Surface: brunt-Titanium brushed finish

Tip Type: Removable Single-wall Titanium with RS-Ti Logo with Tri-bolt mounting
Dia.: 105mm (4.1")
Length: 120mm (4.7")
Surface: brunt-Titanium brushed finish, with laser-etched RS-Ti logo

Piping Extension: L33mm (1.3")
+ 2.5" piping at the back of the muffler, with a pre-welded 2.5" V-band Titanium flange

Additional Mounting Hardware included:
+ additional un-welded stainless-steel 2.5" V-band flange with extension piping
(to adapt to steel or stainless-steel piping)
+ one stainless steel V-band flange
+ a stainless-steel oval muffler canister mounting band.
(to weld on steel or stainless-steel muffler mounting hangers)
 Notes:
requires welding (and cutting) for mounting and attaching piping


** Compatible with optional Revolution RS Tips and Silencers

Part #: 11003525
Price:
475.00Buy Now
Universal 3.0" Muffler & Tip Dia. 160mm

GReddy Revolution RS Muffler (w/ removable tip)

11001131
Car Make: Universal 3.0"
Car Model: Muffler & Tip
Car Year: Dia. 160mm
Notes:

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Now with our Tri-bolt removable Tip, optional GReddy RS tips of different length, material and shape are also be purchased separately for more customization. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials. For something special, revolutionize your car with a custom GReddy exhaust!
 

3.0" Dia. Universal Muffler and Tip set

* Compatiable with other 115mm RS (Stainless & Titanium) Tips and Silencers

Muffler Type: 160mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 76mm (3")
    Dia.: 160mm (5.3") 
    Length: 300mm (11.8")

Tip Type: Removable Single-wall Stainless-steel with GReddy Logo with Tri-bolt mounting
   Dia.: 115mm (4.5")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Compatible with optional Revolution RS Tips and Silencers

   *** also see our RS-Ti Universal Titainium Muffler & Tip Set

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #: 11001131
Price:
220.00Buy Now
IMAGES:
Universal 3.0" Muffler & Tip Dia. 160mm

GReddy Revolution RS Exhaust (with non removable tip)

11001130
Car Make: Universal 3.0"
Car Model: Muffler & Tip
Car Year: Dia. 160mm
Notes:

GReddy Universal Revolution RS Muffler and Tip sets create options for custom (single or dual muffler) applications as well as for vehicles not covered by the current line-up. Our signature high-quality, straight-through, universal racing sport mufflers offer exceptional flow with a clean, aggressive exhaust note. The compact 304 stainless-steel mufflers feature our improved internal construction with long lasting, high temperature-resistant sound suppression materials.  For something special, revolutionize your car with a custom GReddy exhaust.
 

3.0" Dia. Universal Muffler and Tip set

Muffler Type: 160mm Round Revolution RS
    Type: Straight-through
    Inlet / Outlet : 76mm (3")
    Dia.: 160mm (5.3") 
    Length: 300mm (11.8")

Tip Type: Single-wall Stainless-steel with GReddy Logo non-removable
   Dia.: 115mm (4.5")
   Length:  120mm (4.7")

   Piping Extension: L38mm (1.5")
     - 2.5" piping at the back of the muffler

Notes:  
  requires welding (and cutting) for mounting and attaching piping

Material: 304 Stainless-steel

** Not compatible with optional Revolution RS Tips and Silencers

 

*Because of the custom application, this Universal Revolution RS is NOT valid for the Limited Lifetime Warranty of the application specific Revolution RS systems.

Part #: 11001130
Price:
200.00Buy Now
IMAGES:
Universal 3.0" Muffler & Tip Dia. 160 x L300

RS-Ti Titanium Muffler (w/ removable tip and V-band) 

11002530
Car Make: Universal 3.0"
Car Model: Muffler & Tip
Car Year: Dia. 160 x L300
Notes:

GPP Universal RS-Ti Titanium Muffler and Tip sets create new lightweight options for creating your own custom full Ti or hybrid Ti/steel exhaust system. In addition to the Titanium RS Muffler canister and tip, each kit includes a stainless-steel muffler mounting-band (to weld on mounting hangers), pre-welded titanium inlet pipe and V-band Ti flange, as well as a matching stainless-steel V-band flange and clamp (to adapt the kit to steel piping.) The kits are available in a 3.0” (76mm) and 2.5” (63.5mm) piping sizes. Our signature high quality, straight-through, universal RS racing sport muffler design offers exceptional flow with a clean, yet aggressive exhaust note. And with the RS Tri-bolt removable Tip, optional RS inner tip silencers and tips can be purchased separately for even more customization.

No Titanium Welding Necessary! 

With the included pre-welded Titanium V-band flange and additional stainless-steel flange and stainless steel muffler cansister mounting bracket, you do not have to be able to weld Titanium to have a custom Titanium muffler, exhaust system. Just weld onto the provided flange and canister mounting bracket.

3.0" Dia. Universal Titanium Muffler and Tip set




Muffler Type: 160mm Round RS Titanium
Type: Straight-through
Inlet / Outlet : 76mm (3") V-band flange
Dia.: 160mm (6.3")
Length: 300mm (11.8")
Surface: brunt-Titanium brushed finish, with GPP stamp

Tip Type: Removable Single-wall Titanium with RS-Ti Logo with Tri-bolt mounting
Dia.: 115mm (4.5")
Length: 120mm (4.7")
Surface: brunt-Titanium brushed finish, with laser-etched RS-Ti logo

Piping Extension: L38mm (1.5")
+ 3.0" piping at the back of the muffler, with a pre-welded 3.0" 2-bolt Titanium flange

Additional Mounting Hardware included:
+ additional un-welded stainless-steel 3.0" V-band flange (to adapt to steel or stainless steel piping)
+ one stainless steel V-band flange and clamp
+ a stainless-steel muffler canister mounting band. (to weld on steel or stainless steel muffler mounting hangers)

Notes:
requires welding (and cutting) for mounting and attaching piping


** Compatible with optional Revolution RS Tips and Silencers

Part #: 11002530
Price:
400.00Buy Now
Universal 3.0" Oval Muffler & Tip 260 x 160 x L300

RS-Ti Oval Titanium Muffler (w/ removable tip and V-band) - New

11003530
Car Make: Universal 3.0"
Car Model: Oval Muffler & Tip
Car Year: 260 x 160 x L300
Notes:

GPP Universal RS-Ti Titanium Muffler and Tip sets create new lightweight options for creating your own custom full Ti or hybrid Ti/steel exhaust system. In addition to the Titanium Oval Muffler canister and tip, each kit includes a stainless-steel oval muffler mounting-band (to weld on mounting hangers), pre-welded titanium inlet pipe and V-band flange, as well as a matching stainless-steel V-band flange and clamp (to adapt the kit to steel piping.) The kits are available in a 3.0” (76mm) and 2.5” (63.5mm) piping sizes. Our signature high quality, straight-through, universal muffler design offers exceptional flow with a clean, optimized exhaust note. And with the 105mm RS Tri-bolt removable Tip, optional 105mm RS inner tip silencers and tips can be purchased separately for even more customization.

No Titanium Welding Necessary! 

With the included pre-welded Titanium V-band flange and additional stainless-steel flange and stainless steel oval muffler canister mounting bracket, you do not have to be able to weld Titanium to have a custom Titanium muffler, exhaust system. Just weld onto the provided flange and canister mounting bracket.

3.0" Dia. inlet Universal Oval Titanium Muffler and 105mm Tip set




Muffler Type: W260 x H160 x L300mm Oval Titanium (10.2"x6.3"x11.8")
Type: Straight-through
Inlet : Centered 76mm (3") V-band flange
Outlet : Center, Offset 20mm down 103mm (4") RS 3-bolt
Surface: brunt-Titanium brushed finish

Tip Type: Removable Single-wall Titanium with RS-Ti Logo with Tri-bolt mounting
Dia.: 105mm (4.1")
Length: 120mm (4.7")
Surface: brunt-Titanium brushed finish, with laser-etched RS-Ti logo

Piping Extension: L33mm (1.3")
+ 3.0" piping at the back of the muffler, with a pre-welded 3.0" V-band Titanium flange

Additional Mounting Hardware included:
+ additional un-welded stainless-steel 3.0" V-band flange with extension piping.
(to adapt to steel or stainless-steel piping)
+ one stainless steel V-band flange
+ a stainless-steel oval muffler canister mounting band.
(to weld on steel or stainless-steel muffler mounting hangers)


Notes:
requires welding (and cutting) for mounting and attaching piping


** Compatible with optional 105mm Revolution RS Tips and Silencers

Part #: 11003530
Price:
500.00Buy Now